Regulation of financial Market

Financial regulation is a form of regulation or supervision, which subjects financial institutions to certain requirements, restrictions and guidelines, aiming to maintain the stability and integrity of the financial system. This may be handled by either a government or non-government organization. Financial regulation has also influenced the structure of banking sectors by increasing the variety of financial products available. Financial regulation forms one of three legal categories which constitutes the content of financial law, the other two being market practices and case law.

The functioning of financial markets is regulated by several legislations that include Acts, Rules, Regulations, Guidelines, Circulars, etc. Understanding the legislations governing the financial markets in India will give the reader a fair idea of how the financial markets in India are regulated. The regulators of the financial market lay down specific rules of behaviour for participants in the financial system and provide for the monitoring of the observance of the rules and regulation. Such regulations became more important in the situations of far reaching technological progress, liberalization and greater integration in the financial system.

Aims of regulation

  • Market confidence: To maintain confidence in the financial system
  • Financial stability: Contributing to the protection and enhancement of stability of the financial system
  • Consumer protection: Securing the appropriate degree of protection for consumers.
Financial Services Regulator
FD and other Banking product and Services RBI
Services in Capital Market and and it’s intermediaries SEBI
Insurance Sector IRDA
New Pension Scheme PFRDA

The Securities Contracts (Regulation) Act, 1956 (SCRA) which was enacted to prevent undesirable transactions in securities and to regulate the business of securities had given certain powers to the Central Government, under the provisions of that Act. The functions of the Central Government under that Act have been granted to SEBI. These Functions are:

(a) Power to call for periodical returns or direct enquires to be made (Section 6): SEBI will receive from every recognized Stock Exchange such periodical returns relating to its affairs as may be prescribed by SCRA rules.

(b) Power to approve the bye-laws of stock exchanges: Section 9 of SCRA provides that any stock exchange may make bye-laws for the regulation ad control of contracts with the previous approval of SEBI.

(c) Power of SEBI to make or amend bye-laws of recognized stock exchanges (Section 10, SCRA): SEBI may either on a request in writing received by it in this behalf from the governing body of a recognized stock exchange or in its own motion make bye-laws on matters specified in Section 9 of SCRA or amend any bye laws made by stock exchange.

(d) Licensing of dealers in securities in certain areas (Section 17 SCRA): SEBI has been empowered to grant a license to any person for the business of dealing in securities in any State or area to which Section 13 of SCRA has not been declared to apply.

(e) Power to delegate: Section 29A of SCRA provides that the Central Government may, by order published in the Official Gazette, direct that the powers exercisable by it under any provision of the SCRA shall, in relation to such matters and subject to such conditions, if any as may be specified in the order, be exercisable also by SEBI or the Reserve Bank of India.

SEBI Regulatory Functions

  1. Registration of brokers and sub brokers and other players in the market.
  2. Registration of collective investment schemes and Mutual Funds.
  3. Regulation of stock brokers, portfolio managers, underwriters and merchant bankers and the business in stock exchanges and any other securities market.
  4. Regulation of takeover bids by companies.
  5. Calling for information by undertaking inspection, conducting enquiries and audits of stock exchanges and intermediaries.
  6. Levying fee or other charges for carrying out the purposes of the Act.
  7. Performing and exercising such power under Securities Contracts (Regulation) Act 1956, as may be delegated by the Government of India.

Protective Functions

  1. Prohibition of fraudulent and unfair trade practices like making misleading statements, manipulations, price rigging etc.
  2. Controlling insider trading and imposing penalties for such practices.
  3. Undertaking steps for investor protection.
  4. Promotion of fair practices and code of conduct in securities market.

Types of Banks: Public, Private and foreign Banks, Payments Bank, Small Finance Banks

In India, the banking system is divided into different types based on ownership and functions. Each type of bank serves specific customers and economic needs. Major categories include public sector banks, private sector banks, foreign banks, payments banks, and small finance banks. Together, they support savings, credit, digital payments, and financial inclusion across the country.

1. Public Sector Banks

Public sector banks are owned and controlled mainly by the Government of India. Examples include State Bank of India, Punjab National Bank, and Bank of Baroda. These banks play a major role in national development by providing banking services in urban and rural areas. They focus strongly on priority sectors like agriculture, small businesses, education, and weaker sections of society. Public banks offer savings accounts, loans, fixed deposits, and government scheme services. Because of government support, people trust these banks highly for safety of money. They also help in implementing government welfare programs such as pensions, subsidies, and direct benefit transfers. Public sector banks aim at social welfare along with profit, making them important for inclusive economic growth in India.

2. Private Sector Banks

Private sector banks are owned by private individuals or companies but are regulated by the Reserve Bank of India. Examples include HDFC Bank, ICICI Bank, Axis Bank, and Kotak Mahindra Bank. These banks focus on customer service, technology, and fast banking solutions. They offer modern facilities like mobile banking, internet banking, instant loans, and digital payments. Private banks mainly serve urban and semi urban areas but are slowly expanding in rural regions as well. They provide personal loans, home loans, credit cards, and business finance efficiently. Though profit oriented, they also follow RBI rules for lending to priority sectors. Their advanced technology and quick services have improved competition and quality in the Indian banking system.

3. Foreign Banks

Foreign banks are banks from other countries that operate branches in India. Examples include Citibank, HSBC, Standard Chartered Bank, and Deutsche Bank. These banks mainly serve large companies, international traders, and high income customers. They specialize in foreign exchange services, international loans, trade finance, and global banking solutions. Foreign banks help in promoting international trade by providing letters of credit and cross border fund transfers. They introduce advanced banking technology and global practices into the Indian financial system. However, their number of branches is limited compared to Indian banks, and they mostly operate in big cities. Even though their reach is small, they play an important role in connecting India with the global banking market.

4. Payments Banks

Payments banks are a special type of bank introduced by RBI to promote digital payments and financial inclusion. They can accept deposits up to a limited amount but cannot give loans or credit cards. Examples include Airtel Payments Bank, India Post Payments Bank, and Paytm Payments Bank. These banks mainly provide savings accounts, money transfer services, mobile payments, ATM cards, and bill payments. They are useful for small income groups, migrant workers, and rural people who need easy banking access. Payments banks focus on low cost, technology based services. By encouraging cashless transactions and basic savings, they help bring more people into the formal banking system of India.

5. Small Finance Banks

Small finance banks are set up to provide banking services to small businesses, farmers, low income groups, and rural areas. Examples include AU Small Finance Bank, Ujjivan Small Finance Bank, and Equitas Small Finance Bank. These banks accept deposits and also give small loans for agriculture, micro enterprises, housing, and personal needs. Their main aim is financial inclusion and economic support to underserved sections of society. They operate mostly in semi urban and rural regions where big banks have limited reach. Small finance banks help people who depend on informal lenders by offering safe banking and affordable credit. Thus, they improve livelihood, employment, and economic stability in India.

6. Co-operative Banks

Cooperative banks are owned and managed by their members who are both customers and shareholders. They mainly serve farmers, small traders, and low income groups. These banks operate on the principle of mutual help. In India, they are divided into urban cooperative banks and rural cooperative banks. Rural cooperative banks provide agricultural loans for crops, seeds, fertilizers, and farm equipment. Urban cooperative banks provide small business loans and savings facilities. They charge lower interest rates and are easily accessible in local areas. Cooperative banks help reduce dependence on moneylenders. They play an important role in rural development and financial inclusion by providing affordable banking services to common people.

7. Regional Rural Banks (RRBs)

Regional Rural Banks were established to serve rural and semi urban areas of India. They are jointly owned by the Central Government, State Government, and a sponsor public sector bank. The main purpose of RRBs is to provide banking and credit facilities to farmers, agricultural labourers, small entrepreneurs, and rural households. They offer savings accounts, fixed deposits, crop loans, small business loans, and government scheme services. RRBs understand local needs and conditions, making loan access easier for rural people. They also support financial inclusion by opening basic bank accounts in villages. Through their services, RRBs help in improving rural income, employment, and economic development.

8. Development Banks

Development banks are financial institutions that provide long term finance for industrial and infrastructure development. In India, examples include Industrial Development Bank of India (IDBI), National Bank for Agriculture and Rural Development (NABARD), and Small Industries Development Bank of India (SIDBI). These banks support large projects such as factories, power plants, roads, and rural development programs. They provide loans at reasonable interest rates and technical guidance. Development banks help new industries grow and encourage entrepreneurship. NABARD especially focuses on agriculture and rural credit planning. By funding development activities, these banks promote balanced economic growth and strengthen the country’s production capacity.

9. Specialized Banks

Specialized banks are set up for specific purposes and sectors of the economy. Examples include Export Import Bank of India (EXIM Bank) for foreign trade, National Housing Bank for housing finance, and National Bank for Financing Infrastructure and Development (NaBFID). These banks provide financial assistance, guidance, and risk support in their respective fields. EXIM Bank helps exporters and importers with loans and trade services. Housing banks support affordable housing projects. Infrastructure banks fund large development projects. These banks focus on strengthening key sectors of the Indian economy and supporting long term national growth. They reduce financial risk and encourage investment in priority areas.

Distinction between Shares and Debentures

Stocks/Shares

Stocks or shares are popular investment tools, issued by corporate entities through which they sell a portion of their proprietorship to general investors and raise funds through it. These are also known as scrips or owned capital.  As an owner of stocks, you are holding a part of the company’s financial capital. It entitles you to receive a portion of the company’s profit in return.

Types of stocks are

  • Equity shares
  • Preference shares

The price that you pay to buy shares is called share price. In return, you qualify to receive dividends as decided by the company. Profit is announced during the end of a financial year, which means, the longer you stay invested, higher will be your gain from the share.

Share prices depend on various factors, including market performance, macroeconomic parameters, sectoral performance, and individual company performance. As investment instruments, share are highly liquid and traded in the exchanges.

Debentures

Debentures are debt tools; issued by companies to raise funds as loans from the public. It is an acknowledgement from a corporate entity that it has taken a loan from you. However, a debenture isn’t a secured loan. It is backed solely by the creditworthiness of the issuing firm. But it carries some amount of assurance. It is why, in India, if a company declares bankruptcy, debenture holders have the first claim over the company’s assets.

Categories of debentures

Debentures also have different types, based on their intrinsic characters.

  • Perpetual Debentures: Perpetual debentures don’t have a maturity value and treated much like equities. These bonds create a lifelong stream of income for the investors, and they can trade those the market like equities.
  • Convertible Debentures: Some corporate give the offer to receive maturity value on debenture or get it converted to equity. This allows investors to alleviate some of the uncertainties associated with investing in unsecured bonds.
  • Non-convertible Debentures: It is a traditional type of bond that pays out the maturity and accrued interest at the end of the tenure without giving any opportunities to convert to equity.

Debentures can be either floating or fixed in nature. The payout on floating rate debenture varies with the market movement. But, for fixed-rate debentures, final payout remains assured.

Shares

Debentures

Meaning The shares are the owned funds of the company. The debentures are the borrowed funds of the company.
What is it? Shares represent the capital of the company. Debentures represent the debt of the company.
Holder The holder of shares is known as shareholder. The holder of debentures is known as debenture holder.
Status of Holders Owners Creditors
Form of Return Shareholders get the dividend. Debenture holders get the interest.
Payment of return Dividend can be paid to shareholders only out of profits. Interest can be paid to debenture holders even if there is no profit.
Allowable deduction Dividend is an appropriation of profit and so it is not allowed as deduction. Interest is a business expense and so it is allowed as deduction from profit.
Security for payment No Yes
Voting Rights The holders of shares have voting rights. The holders of debentures do not have any voting rights.
Conversion Shares can never be converted into debentures. Debentures can be converted into shares.
Repayment in the event of winding up Shares are repaid after the payment of all the liabilities. Debentures get priority over shares, and so they are repaid before shares.
Quantum Dividend on shares is an appropriation of profit. Interest on debentures is a charge against profit.
Trust Deed No trust deed is executed in case of shares. When the debentures are issued to the public, trust deed must be executed.

Issue of Debentures as a Collateral Security

The term ‘collateral security’ implies additional security given for a loan. Where a company obtains a loan from a bank or insurance company and the security offered to the company is not sufficient, the company may issue its own debentures to the lender as collateral security against the loan. In such a case, the lender has the absolute right over the debentures until and unless the loan is repaid.

Debentures can also be issued by a company as collateral security against a bank loan or any such borrowings. A collateral security is like a parallel security which is provided along with the actual security against the loan taken. Debentures issued as such a collateral liability are a contingent liability for the company, i.e. the liability may or may not arise. Only when the company defaults on such a loan will this liability arise.

On repayment of the loan, however, the lender is legally bound to release the debentures forthwith. But in case the loan is not repaid by the company on the due date or in the event of any other breach of agreement, the lender has the right to retain these debentures and to realize them. The lender is entitled to interest only on the amount of loan, but not on the debentures issued as collateral security.

Generally, because it is a contingent liability no entry is passed in the books of the company against such an issue of debentures. However, if some companies opt to pass an entry to record such a transaction, the following entries may be passed

Particulars Amount Amount
Debentures Suspense A/c Dr xxx
To Debentures  A/c xxx
(Being debentures issued as a collateral security)

Particulars Amount Amount
Debentures  A/c Dr xxx
To Debenture Suspense A/c xxx
(Being debentures cancelled on repayment of the loan)

 

Accounting Treatment:

When debentures are issued as a collateral security there are two treatments in the accounting books.

First Method:

(i) No journal entry is made in the account books at the time of issue of such debentures. A note is appended below the loan on the liabilities side of the balance sheet to the fact that they have been secured by the issue of debentures.

This will be shown in the balance sheet as follows:

 

Balance Sheet
Equity and Liabilities Note No. Current Year Previous Year
Non-Current Liabilities      
Long Term Borrowings      
Debentures      
Loan      

Second Method:

(ii) Sometimes issue of debentures as collateral security is recorded by making journal entry as follows:

Debentures Suspense a/c Dr.

To Debentures a/c

(With nominal value of debentures)

The Debentures Suspense Account will appear on the assets side of the balance sheet and Debentures on the liabilities side. When the loan is re-paid the entry is reversed in order to cancel it.

Issue of Debentures for, Consideration other than Cash

Debentures can be issued for non-cash considerations. The company may have purchased assets from some vendors or acquired some other business. Then instead of paying cash, the company may issue debentures to such vendors. Such an issue for debentures can be at par, or for a discount or at a premium.

Sometimes, a company purchases a running business (assets and liabilities) and issues to vendor, debentures as consideration. It is called issue of debentures in consideration, other than cash.

In such situation following entries are recorded.

(i) For Acquisition of Assets:

Sundry assets a/c Dr. (with amount of purchase consideration)

Vendor’s a/c

(Being sundry assets purchased)

(ii) For issue of Debentures at par:

Vendor’s a/c Dr. (with amount of purchase consideration)

Debentures a/c

(Being debentures issued as consideration for assets purchased)

(iii) For issue of Debentures at discount:

Vendor A/c Dr.

Discount on Issue of Debentures A/c

To Debentures A/c

(iv) For issue of Debentures at Premium:

Vendor A/c Dr.

To Debentures A/c

To Securities Premium Reserve A/c

Formula to find out No. of Debentures Issued

No. of Debentures Issued = Amount Payable/Issue Price

Particulars Amount Amount
Asset A/c Dr xxx
To Vendors A/c xxx
(Being asset purchased from vendor)
Vendors A/c Dr xxx
To Debentures A/c xxx
(Being debentures issued at par against the purchase of asset)
Vendors A/c Dr xxx
To Debentures A/c xxx
To Securities Premium A/c xxx
(Being debentures issued at a premium against the purchase of asset)
Vendors A/c Dr xxx
Discount on Debentures A/c Dr xxx
To Debentures A/c xxx
(Being debentures issued at a discount against the purchase of asset)  

Redemption by Payment in Lump Sum, Open Market, Conversion

The Companies Act, 1956 does not lay down any stringent guidelines or conditions for the redemption of debentures. Regardless, this debt instrument is invariably redeemable, and the process is usually carried out as per the terms stated in a prospectus formulated during issuance.

  1. Lump-sum payment on a prefixed date

This one-time method is considered to be among the simplest redeeming options. As per this method, debenture holders receive the promised sum on the prefixed date.

If the debentures are not redeemed at discount or premium, the lump sum amount, calculated by the summation of the principal value of all debentures, is paid out on the prefixed or maturity date that is mentioned on debenture agreement. The issuing company may decide to pay off the debenture amount before its maturity. Since companies know in advance, when they have to pay off for debenture, they are better positioned to streamline it. 

The accounting treatment of redemption of debentures:

S.N.  Particulars  Amount (Rs.) Amount (Rs.)
1. Bank A/C                                                                 (Dr) 

To Debenture Redemption Investment A/C

(investment sold)

xxxx xxxx
2. Profit and Loss Appropriation A/C (Dr)

To Debenture Redemption A/C

(Being amount of profit transferred)

xxxx xxxx
Debenture Redemption Fund A/C                     (Dr)

To General Reserve A/C

To Capital Reserve A/C

(Profit on sale of investment)

Buy from the open market

Companies can also purchase debentures from an open market if their units are being traded on a regulated exchange. It will save them from the hassle of being subject to administrative documentation. Furthermore, often debentures are traded at a discount in the market. In turn, it allows individuals to lower redemption payout and helps retain more revenue. 

Its accounting treatment is shown in a tabular format below:

a) When purchased for a premium

S.N.  Particulars  Amount (Rs.) Amount (Rs.)
1. Debenture A/c                                                        (Dr) 

Loss on Redemption A/C                                      (Dr)

To Bank A/c

xxxx

xxxx

2. Profit & Loss A/c (Dr)

To Loss on Redemption A/c

xxxx xxxx

b) When purchased at a discount 

S.N.  Particulars  Amount (Rs.) Amount (Rs.)
1. Debenture A/C                                                        (Dr) 

To Profit on Redemption A/C                               (Dr)

To Bank A/C

xxxx

xxxx

xxxx
2. Profit on Redemption A/C (Dr)

To Capital Reserve A/c

xxxx xxxx

Regardless, before proceeding with the redemption of debentures, both investors and issuers must weigh in the pros and cons of redeeming them in the prevailing market condition. Also, one should be clear about their purpose of redeeming these debt-instruments and research extensively on their prospect.

Conversion Method

Convertible Debentures are those which can be converted into equity shares at the option of the holder. The most significant feature of issuing these debentures is that it gives a fixed income to the holder along with a chance of having equity shares if the holder exercises his conversion option to the company as capital gains.

An enterprise can reclaim its debentures by transforming them into a new class of debentures or shares. If debenture holders find that the proffer is useful to them, they can exercise their right of transforming their debentures into new class of debentures or shares. These new shares or debentures can be either circulated at a premium, at a discount or at par. It may be noted that this method is applicable only to convertible debentures.

  • Under this method, the debentures are redeemed by converting them into new class debentures or shares.
  • At the time of conversion, new shares or debentures can be issued at par or at a premium or at a discount.

Features of Convertible Debentures:

It has been stated above that when a company issues convertible debentures it clearly states the terms and conditions and timing of conversion. Moreover, it also states the rate of conversion (i.e., how much equity shares will be converted for each debenture), the price at which the debentures will be converted, and the time period (i.e., at what time the conversion procedure will take place).

Conversion Ratio:

It indicates the number of equity shares a holder will get in exchange of his convertible debentures. In short, the number of equity shares per convertible debenture is known as Conversion Ratio. In the previous example, the ratio was 1: 2, i.e., the holder of one convertible debenture of Rs. 100 each would be allotted two equity shares of Rs. 50 each. Hence, the ratio of conversion is 1: 2.

Conversion Price:

The price so paid at the time of conversion from debentures to equity shares is called conversion price. If both the prices of each debenture and each equity share are known the same can be easily found out. In the example stated above, the Conversion price of each equity share was Rs. 50 and of debenture Rs. 100.

Thus, the ratio is calculated as:

Conversion Ratio = Per Value of Convertible Debentures/ Conversion Price

However, from the above guidelines framed by SEBI, it becomes clear that there are three types of convertible debentures:

(a) The convertible debentures which are compulsorily converted must be converted within 18 months;

(b) Those which are optional must be converted within 36 months; and

(c) Those which are converted after 36 months will carry “Put” and “Call” options.

From the discussions made so far it becomes clear that convertible debentures are issued for the following purposes:

(a) Sweetening Fixed Income Securities;

(b) Lower Cost of Capital;

(c) Deferred Equity Financing; and

(d) Dilution of Earnings.

(a) Sweetening Fixed Income Securities:

Since the convertible debentures are very much attractive to the fixed income group for the fixed rate of interest/income along with the benefit of capital gains, it may be termed as “Sweetening Fixed Income Securities”, rather, the convertibility features make the debenture ‘sweety’.

Moreover, the convertibility features help the company to save the amount of interest to be paid in cash, rather, they pay dividend (or Bonus Shares), after the debentures are converted into equity shares.

(b) Lower Cost of Capital:

We know that every firm needs financing both for long-term as well as for short-term for its various activities including promotional expansion and development at its different phases, and in most of the cases the needs are satisfied by equity financing. But, instead of issuing equity, if a firm issues convertible debentures it will be less costly as interest on debentures is tax deductible at its initial stages.

Obviously, when the purpose of having loans will be completed, i.e., during prosperity, instead of redeeming the debentures the company may convert them into equity shares and they will take part in the share of the profit by way of dividend. At the same time, no cash is required to redeem such debentures.

(c) Deferred Equity Financing:

It has been stated above that a company, after issuing Convertible Debentures, is practically issuing equity shares of a future date. This is particularly done by a company when the current market price of a share is below the face value of a share, although the shares are issued at a higher price.

In other words, this technique can successfully be implemented by increasing the Conversion Price than the prevailing market price of an equity share.

(d) Dilution of Earnings:

Dilution of earnings can be avoided if a firm issues convertible debentures. Usually, a firm cannot increase the number of equity shares till its investment pattern is found to be suitable, rather, it will prefer to issue fixed interest securities just to take its benefits.

Conversion Value of Premium:

Needless to say that the conversion value of a convertible debenture or security is nothing but the conversion ratio of the security times the market price per share of the equity share. It has already been stated earlier in the above paragraph that convertible debentures or securities help the potential investors with a fixed return from a debenture as interest or a fixed amount of dividend from the preference shares.

Moreover, the investor receives an option to convert his debentures/pref. shares into equity shares and comes under capital gains. Due to the above, a company usually sells the convertible securities at a lower yield than it would have to pay on a convertible debenture or preference share.

At the time of issue, the convertible debentures are priced higher than its conversion value, the difference between the two represents the Conversion Premium. The Conversion Premium is expressed as a percentage.

The Conversion Premium is calculated as:

Conversion Premium = {(Market Value- Conversion/Investment Value)/ Conversion/Investment Value}*100

Redemption by Conversion of Debentures into Shares/New Debentures:

Sometimes a company may issue convertible debentures, i.e., the debentures which may be converted into shares.

Practically, it provides the debenture holders the right to exercise the option to convert their debenture into shares within a stipulated period at a stipulated rate. Issue of such convertible debentures must be authorised by special resolution of the company which must also be approved by the Central Government.

Generally, this conversion is affected at a discount on the market price of the shares but at a premium on the face value of shares. The debenture holders will exercise their option if it becomes beneficial to them; otherwise they will be repaid in cash.

Accounting for Redemption of Debentures under Sinking Fund method

Sinking Fund Method is a systematic approach used by companies to accumulate funds for the redemption of debentures at maturity. Under this method, the company sets aside a fixed amount annually and invests it in secure interest-bearing securities, such as government bonds. Over time, the invested funds grow due to compounded interest, ensuring that sufficient money is available for debenture repayment. This method reduces financial burden at the time of redemption and provides security to investors. It is widely used for long-term liabilities, ensuring disciplined financial planning and smooth debt repayment without straining the company’s liquidity.

Characteristics of Sinking Fund Method:

  • Systematic Fund Accumulation

The Sinking Fund Method follows a structured approach where the company sets aside a fixed amount annually from its profits. This amount is invested in interest-bearing securities, allowing it to grow over time. The disciplined accumulation ensures that sufficient funds are available when debentures mature, eliminating the need for sudden financial adjustments. By spreading the financial obligation over multiple years, companies avoid liquidity issues and maintain their financial stability. This method is especially useful for long-term debt obligations, ensuring that funds are available precisely when needed.

  • Investment in Secure Assets

The funds set aside under this method are not left idle but are invested in secure assets, such as government bonds or fixed deposits. These investments generate interest income, which contributes to the growth of the fund over time. Since these assets are generally low-risk, the company ensures capital safety while earning a return on the funds. By choosing secure and stable investment options, businesses protect the sinking fund from market volatility, reducing the risk of shortfalls at the time of redemption.

  • Compound Growth of Funds

One of the major advantages of the Sinking Fund Method is the power of compound interest. As the company invests the set-aside funds annually, the accumulated amount grows due to interest earnings. This compounding effect significantly increases the value of the sinking fund over time. As a result, the company does not have to contribute the entire redemption amount on its own; instead, the interest earned helps meet a portion of the liability, easing the financial burden on the organization.

  • Reduction of Financial Burden at Maturity

By using the Sinking Fund Method, a company ensures that the burden of debenture redemption is spread over several years rather than being faced as a single large payment. This systematic approach prevents financial strain and liquidity crises. Since the company gradually accumulates funds, it avoids sudden cash outflows, which could otherwise disrupt its working capital or operations. This method also reduces dependency on external borrowing, making the company financially self-sufficient in handling its liabilities.

  • Legal and Accounting Compliance

Many regulatory authorities mandate the creation of a sinking fund for debenture redemption to protect investor interests. Companies must follow accounting standards and disclosure norms while maintaining a sinking fund. The amount set aside and the investments made must be properly recorded in the books of accounts. This ensures financial transparency and reassures debenture holders that the company is making efforts to meet its future obligations. Proper accounting treatment is essential for accurately reflecting the fund in the Balance Sheet under “Reserves and Surplus.”

  • Trustee Management and Control

In many cases, the sinking fund is managed by an independent trustee or a financial institution to ensure proper utilization. The trustee is responsible for investing the funds, monitoring returns, and ensuring timely redemption of debentures. This arrangement prevents mismanagement or misuse of the sinking fund by the company. By placing control in the hands of a trustee, businesses enhance investor confidence, as it assures debenture holders that the funds are being properly managed and will be available for redemption as planned.

Accounting for Redemption of Debentures under Sinking Fund Method:

Date Particulars Debit (₹) Credit (₹) Explanation
At the end of each year 1. Transfer of annual appropriation to Sinking Fund
(Year-End) Profit & Loss A/c Dr. XX Transfer from profits to Sinking Fund.
Sinking Fund A/c Cr. XX
2. Investment of Sinking Fund amount
(Same Year) Sinking Fund Investment A/c Dr. XX Investment of the fund in securities.
Bank A/c Cr. XX
At the end of each year (Interest on Investments)
(Year-End) Bank A/c Dr. XX Interest received on Sinking Fund Investment.
Interest on Sinking Fund Investment A/c Cr. XX
4. Transfer of Interest to Sinking Fund
(Year-End) Interest on Sinking Fund Investment A/c Dr. XX Interest added to Sinking Fund balance.
Sinking Fund A/c Cr. XX
At the time of Redemption 5. Sale of Sinking Fund Investments
(Maturity) Bank A/c Dr. XX Sale of investments for debenture repayment.
Sinking Fund Investment A/c Cr. XX
6. Transfer of Profit or Loss on Investment Sale
(Maturity) Sinking Fund A/c Dr. XX If any profit, it is transferred to Sinking Fund.
Profit on Sale of Investment A/c Cr. XX
(If Loss) Loss on Sale of Investment A/c Dr. XX If any loss, it is adjusted in Sinking Fund.
Sinking Fund A/c Cr. XX
7. Payment to Debenture Holders
(Maturity) Debenture Holders A/c Dr. XX Amount due to debenture holders.
Bank A/c Cr. XX Payment made to debenture holders.
8. Transfer of Sinking Fund Balance (if any) to General Reserve
(Maturity) Sinking Fund A/c Dr. XX Remaining balance transferred to General Reserve.
General Reserve A/c Cr. XX x

Terms of Redemption: at Par, at Premium, or at Discount

Debentures are a type of long-term debt instrument used by companies to raise funds from the public or institutional investors. They are essentially a written acknowledgement of debt, under which the company promises to repay the principal along with a fixed rate of interest after a specified period. Debenture holders are creditors of the company and do not have ownership rights. Debentures can be secured or unsecured and may be convertible or non-convertible depending on the terms of issue.

These instruments offer a relatively safe investment option as they often come with fixed returns, especially when backed by company assets (secured debentures). From a company’s perspective, debentures are an effective tool for raising capital without diluting ownership. However, companies must ensure timely interest payments and redemption, as failure to do so can lead to legal action or reputational loss.

The application money is refunded in case the application is rejected and in case of partial allotment, the excess amount of application money will be used in further calls.

  • At Par: At Par refers to the issuance or trading of a financial instrument—such as shares or debentures—at its face value or nominal value. For example, if a share has a face value of ₹100 and it is issued at ₹100, it is said to be issued at par. In this case, there is no premium or discount involved. This term is commonly used in accounting and finance to indicate that the security’s issue price is equal to its stated value. Issuing at par is often done to attract investors, especially when a company is newly formed or rebuilding trust.
  • At Premium: At Premium refers to the issuance of shares or debentures at a price higher than their face (nominal) value. For instance, if a share with a face value of ₹100 is issued at ₹120, it is said to be issued at a premium of ₹20. The extra amount received over the face value is credited to the Securities Premium Account, which is a part of the company’s reserves. This amount cannot be used freely like other reserves and is governed by specific provisions under the Companies Act. Issuing at premium often reflects the company’s good reputation, performance, or strong investor demand.
  • At Discount: At Discount refers to the issuance of shares or debentures at a price lower than their face (nominal) value. For example, if a share with a face value of ₹100 is issued at ₹90, it is said to be issued at a discount of ₹10. This means the company receives less than the nominal value of the security. Issuing securities at a discount is generally discouraged, especially in the case of equity shares, and is subject to strict legal restrictions under the Companies Act. However, it may be allowed in certain cases like sweat equity or for debentures to attract investors.

Accounting Treatment for Terms of Issue

Let us now see the journal entries for the six different scenarios of the terms of issue. These are the entries passed for the issue of the shares in these different cases.

1) Issued at Par & Redeemable at Par

Particulars Amount Amount
Bank A/c Dr xxx
To Debenture Application & Allotment A/c xxx
(Being application money received)

2) Issued at Discount & Redeemable at Par

Particulars Amount Amount
Bank A/c Dr xxx
To Debenture Allotment A/c xxx
(Being allotment money received)
Particulars Amount Amount
Debenture Allotment A/c Dr xxx
Discount on Debenture A/c Dr xxx
To Debenture A/c xxx
(Being allotment of debentures at discount)

3) Issued at Premium & Redeemable at Par

Particulars Amount Amount
Bank A/c Dr xxx
To Debenture Allotment/Call A/c xxx
(Being allotment/call money received)
Particulars Amount Amount

Debenture Allotment/Call A/c

Dr xxx

To Debenture A/c

xxx

To Securities Premium A/c

xxx
(Being allotment of debentures at premium)

4) Issue at Par & Redeemable at Premium

Particulars Amount Amount
Bank A/c Dr xxx
To Debenture Application & Allotment A/c xxx
(Being application money received)
Particulars Amount Amount

Debenture Application & Allotment A/c

Dr xxx

Loss on Issue of Debentures

Dr xxx (premium amount)

To Debentures A/c

xxx (nominal value)

To Premium on Redemption of Debenture A/c

xxx (premium amount)

(Allotment of debentures at par, redeemable at premium)

5) Issued at Discount & Redeemable at Premium

Particulars Amount Amount

Bank A/c

Dr xxx

To Debenture Application & Allotment A/c

xxx

(Being application money received)

Particulars Amount Amount

Debenture Application & Allotment A/c

Dr

xxx

Loss on Issue of Debentures

Dr

xxx (Discount Amount + premium on redemption)

To Debentures A/c

xxx (nominal value)

To Premium on Redemption of Debenture A/c

xxx (premium amount)

(Allotment of debentures at discount, redeemable at premium)

6) Issued at Premium & Redeemable at Premium

Particulars Amount Amount
Bank A/c Dr xxx

To Debenture Application & Allotment A/c

xxx

(Being application money received)

Particulars Amount Amount

Debenture Application & Allotment A/c

Dr xxx

Loss on Issue of Debentures

Dr

xxx (premium amount)

To Debentures A/c

xxx (nominal value)

To Securities Premium A/c

xxx (premium on issue)

To Premium on Redemption of Debenture A/c

xxx (premium on redemption)

(Allotment of debentures at premium, redeemable at premium)

Writing off Discount/Loss on Issue of Debentures

The loss or discount on the issue of debentures is typically a capital loss or a fictitious asset and, hence, has to be written-off during the debentures’ lifetime. The amount of loss or discount on issue of debentures has to be not be written-off during the year of its issue since the benefit of the debentures would accumulate to the enterprise till their restitution or redemption.

Discount on issue of debentures is a loss of capital nature. It will appear on the asset side of balance sheet till it is written off. It is desirable that it is written off as quickly as possible. Discount on issue of debentures, being a loss of capital nature, it can be written off in two ways.

First Method:

In this case, the total amount of discount on debenture is spread over the life of debentures equally. Suppose the debentures are issued at discount, to be redeemed after five years. The amount of discount will be divided by five and the amount so arrived at will be charged to profit and loss account for five years. This method is followed where debentures are redeemed at the end of a specified period.

Second Method:

In this method discount is written off every year in proportion to the amount of debentures used every year. This method is followed where debentures are redeemed every year by serving a notice and by draw of lots.

Accounting entry for writing off discount is as under:

Profit and Loss a/c  
  To Discount on debentures a/c  

Capitalization of Profit Method

Capitalisation method is a method of determining the value of a firm by calculating the net present value of expected future profits or cash flows of the firm. It is used when the actual profits of the firm are less than the normal profits. It is calculated by dividing the adjusted profit by normal rate of return.

= {Profit (Adjusted)/Normal Rate of Return} *100

(i) Capitalization of Average Profits: Under this method, the value of goodwill is calculated by deducting the actual capital employed from the capitalized value of the average profits on the basis of the normal rate of return.

  • Goodwill = Normal Capital – Actual Capital Employed
  • # Normal Capital or Capitalized Average profits = Average Profits x (100/Normal Rate of Return)
  • # Actual Capital Employed = Total Assets (excluding goodwill) – Outside Liabilities

(ii) Capitalization of Super Profits: Under this method, Goodwill is calculated by capitalizing the super profits directly.

  • Goodwill = Super Profits x (100/ Normal Rate of Return)
error: Content is protected !!