Measures of Returns

Accounting rate of return (ARR) is also known as average rate of return. ARR is based upon accounting information rather than on cash flow. In other words, Accounting rate of return (ARR) refers to the rate of earning or rate of net profit after tax on investment.
ARR consider profitability rather than liquidity. Under ARR technique, the average annual expected book income is divided by the average book investment in the project.

ARR = (Average net income/Average investment) x 100
Where,
Average net income= Total net income/No. of years
Average investment= Net investment/2

Calculation Of Accounting Rate Of Return (ARR)

illustration:
The initial investment of the project is $30,000. The net profit after tax is as follows:
Year……………………….Net profit after tax($)
1………………………………25000
2………………………………30000
3……………………………….20000
4………………………………..25000
5………………………………..40000

Required: Accounting rate of return.
Solution
Calculation of ARR:
ARR = (Average net income/Average investment) x 100
= (28000/15000) x 100 = 18.67%.
Where,
Average net income = Total net income/No, of years
= 25000+30000+20000+25000+40000/5 = 28000
Average Investment = Net investment/2 = 30000/2 = 15000

Decision Rules Of Accounting Rate Of Return (ARR)

  1. If projects are independent
    Accept the project which has higher ARR than standard.
    Reject the project which has lower ARR than standard.
    B. If projects are mutually exclusive
    Accept the project which has highest ARR
    Reject other projects.

Advantages Of Accounting Rate Of Return (ARR)

  1. ARR is based on accounting information, therefore, other special reports are not required for determining ARR.
  2. ARR method is easy to calculate and simple to understand.

3.ARR method is based on accounting profit hence measures the profitability of investment.

Disadvantages Of Accounting Rate OF Return (ARR)

  1. ARR ignores the time value of money.
  2. ARR method ignores the cash flow from investment
  3. ARR method does not consider terminal value of the project.

Source Documents

A source document is the original document that contains the details of a business transaction. A source document captures the key information about a transaction, such as the names of the parties involved, amounts paid (if any), the date, and the substance of the transaction. Source documents are frequently identified with a unique number, so that they can be differentiated in the accounting system. The pre-numbering of documents is particularly useful, since it allows a company to investigate whether any documents are missing.

Once the information in a source document has been recorded in the accounting system, the source document is indexed for easy access and archived. Documents generated within the past year are generally stored on-site, with older documents being stored in less expensive off-site storage facilities.

Source documents are critical to auditors, who use them as evidence that recorded transactions actually occurred. A source document is also used by companies as proof when dealing with their business partners, usually in regard to a payments. Examples of source documents are:

  • Cancelled check
  • Credit memo
  • Deposit slip
  • Expense report
  • Invoice
  • Materials requisition form
  • Purchase order
  • Time card
  • Sales receipt

For evidentiary purposes, electronic images of source documents are generally acceptable, though paper-based documentation may still be required in some cases.

It is usually necessary to retain source documents for several years. The Internal Revenue Service mandates retention intervals for some types of documents related to payroll.

Common types of source documents

In its simplest form, a source document generally contains the following information:

  • The date of the transaction
  • The total amount of the transaction
  • A description of the transaction
  • One or more authorizing signatures

The most common documents are:

  • Checks
  • Invoices
  • Receipts
  • Credit memos
  • Employee time cards
  • Deposit slips
  • Purchase orders

Document Storage

Any information generated through source documents should be properly recorded in either the company’s journal, accounting software, or financial books. After the initial recording, all documents should be preserved and organized into a file and put into a system so they can be retrieved at any time. It is also important to make a record of general internal control procedures specifying who in the firm can access and authorize payments, orders, and other transactions.

Originality of source documents

The majority of the time, photocopies of source documents are legally permissible. According to the US Internal Review Service (IRS), as long as these photocopies are complete, legible, and accurate representations of the original document, they are legally acceptable. Similarly, the Canadian Revenue Agency (CRA) accepts scanned documents as long as the records are produced and retained in paper format or stored in an electronically accessible and readable format. Although organizing and filing these documents can be tedious, putting in the extra time to properly maintain a paper trail and create an easy way to access these documents can result in huge time savings in the future, and also ensures greater transparency.

Some of the important types of Documents Used in Accounting are as follows:

1. Cash Memo:

Sales and purchases are the main features of any business enterprise. For recording cash sales and cash purchases, cash memos serve as source documents. Cash memo is a source document in which all transactions pertaining to cash sales or purchases are to be recorded.

When goods are purchased by a business enterprise on cash basis then the firm receives cash memo and when a business enterprise sells goods, it gives cash memo, in which all details of the transaction relating to the purchase or sales viz. number or quantity purchased/sold, price, discount received or allowed and sales tax collected or deposited are provided. On the basis of cash memos, these transactions are then recorded in the book of accounts. In audit, the foremost duty of the auditor is to verify the cash book with reference to the cash vouchers.

2. Invoice and Bill:

Invoice or bill records the credit transactions related to sale or purchase. This is prepared when a firm purchases or sells the goods on credit. At the time, when the goods are sold by the business enterprise on credit, sales invoice is prepared in which all details of the credit sales viz. the quantity, rate and total amount etc. are mentioned.

Usually, invoices are made in duplicate, the main copy (original) is sent to the purchaser and the another is kept by the business enterprise for record and future reference. Similarly, when goods are purchased on credit, the supplier prepares the invoice in duplicate. When the main copy is received by the purchaser, it becomes a bill.

3. Receipt:

Receipt is an evidence of making the payment on account of any business transaction. This source document is prepared for showing the proof of giving any cash to the party (who receives the cash) on account of any business transaction. At least two copies are made of any receipt.

The original copy is prepared for giving it to the party who makes the payment and another copy is kept for record. The details about the business transaction on account of which the cash is received viz. date, amount, name of the party and the nature of payment etc. are given in this source document.

4. Pay in Slip:

This document serves the purpose of providing an evidence that on particular date, a specific amount has been deposited in the bank. When a depositor deposits money in the bank account, he fills up a form provided by the bank containing the information about the date, amount to be deposited and the name of the depositor etc.

The bank clerk signs, stamps the counterfoil of the pay in slip and returns it to the depositor. Usually, the large business enterprises obtain the complete bunch of pay-in-slips and get them all bound in a book. The counterfoil of the pay in slip becomes a source document, which acts as an evidence for the customer to record this transaction in the books of accounts.

5. Cheque:

A cheque in an unconditional order, drawn upon a specified hanker, signed by the maker, directing the banker to pay on demand a certain sum of money only to the order of a person or the bearer of the instrument. -Negotiable Instruments Act, 1881

A cheque is an instrument drawn upon a banker and payable on demand. The bank issues a booklet containing cheque forms to its account holders. Digits mentioned on the bottom of the cheques denote code of ‘State’, ‘Bank’, ‘Branch’, ‘Cheque’ and ‘Type of Account’ respectively.

Through cheques, payment can be made to a specific person by writing the name of the party after the words ‘Pay’ and by striking off the word ‘bearer’ with a line printed on the cheque. In this case cheque is called an order cheque. To avoid any fraud, cheques are crossed by drawing two parallel transverse lines across the cheque. Sometimes the words ‘& Co’, ‘A/C Payee Only’, ‘Not Negotiable’ or ‘Name of the Bank’ is written within these lines.

6. Debit Note:

A debit note is a document which shows that the business enterprise has raised debit against the party to whom this document is sent in respect of any business transaction other than the credit sale. Business enterprise may make a debit note against the supplier for an amount which is to be recovered from him, when the business enterprise returns some goods which are defective in nature or not as per specifications.

A debit note can also be prepared in case of overpayment to any party. In this document, all details about the date and amount of transaction, the name of the party whose account is debited along with reason for debiting his account are mentioned.

7. Credit Note:

A credit note is a document which shows that the business enterprise has given the credit to the party to whom this document is sent in respect of any business transaction other than credit purchase. When a business enterprise receives back the goods sold earlier then it makes a credit note in favour of the purchaser showing that his account has been credited in the books of business enterprise.

A credit note can also be prepared in case of less payment to any party. In this document, all details about the date and amount of transaction, the name of the party whose account is credited along with reason for crediting his account are mentioned. To distinguish it from a debit note, it is commonly prepared in red ink.

8. Vouchers:

The documents prepared for the purpose of recording business transactions in the books of accounts are known as vouchers. Voucher is prepared on the basis of source documents. For recording business transactions in the books of accounts, source documents are further analyzed and conclusion is drawn as to which account is to be debited and which account is to be credited. The document on which this conclusion is written is known as voucher or accounting voucher.

Features of Voucher:

(i) It is a document.

(ii) It is prepared by analyzing the source documents.

(iii) It contains decision regarding the accounts to be debited and credited.

(iv) It helps in recording an accounting entry in the books of accounts.

(v) It is prepared and signed by the accountant and is also countersigned by the authorized signatory of the business enterprise.

Preparation of Vouchers:

Business transactions in the books of accounts are available in the source documents. These documents are further analysed and conclusion is to be drawn about which account is to be debited and which account is to be credited. After deciding the head of accounts to be debited and credited, vouchers are prepared. Usually, blank forms are readily available in the printed form in the market.

Accounting Vouchers are of two types viz:

(i) Cash Voucher and

(ii) Non Cash Voucher.

Completing the accounting cycle measures Business income

One of the most significant accounting concepts is “Concept of Income”. Similarly, measurement of a business income is also an important function of an accountant.

In General term, payment received in lieu of services or goods are called income, for example, salary received by any employee is his income. There may be different type of incomes like Gross income, Net income, National Income, and Personal income, but we are here more concerned for a business income. Surplus revenue over expenses incurred is called as “Business Income.”

Objectives of Net Income

Following are the important objectives of a net income:

  • Historical income figure is the base for future projections.
  • Ascertainment of a net income is necessary to give portion of profit to employees.
  • To evaluate the activities, which give higher return on scarce resources are preferred. It helps to increase the wealth of a firm.
  • Ascertainment of a net income is helpful for paying dividends to the shareholders of any company.
  • Return of income on capital employed, gives an idea of overall efficiency of a business.

Definition of Income

The most authentic definition is given by the American Accounting Association as −

“The realized net income of an enterprise measures its effectiveness as an operative unit and is the change in its net assets arising out of a (a) the excess or deficiency of revenue compared with related expired cost, and (b) other gains or losses to the enterprise from sales, exchange or other conversion of assets:”.

According to the American Accounting Association, to be as business income, income should be realized. For example, to be a business income, only appreciation in value of assets of a company is not enough, for this, asset has really been disposed of.

Accounting Period

For the measurement of any income concerns, instead of a point of time, a span of time is required. Creditors, investors, owners, and government, all of them require systematic accounting reports at regular and proper intervals. The maximum interval between reports is one year, as it helps a businessman to take any corrective action.

An accounting period concept is directly related to matching concept and realization concept; in the absence of any of them, we could not measure income of the concerns. On the basis of matching concept, expenses should be determined in a particular accounting period (usually a year) and matched with the revenue (based on realization concept) and the result will be income or loss of the accounting period.

Accounting Concept and Income Measurement

The measurement of accounting income is the subject to several accounting concepts and conventions. Impact of accounting concepts and convention on measurement of the accounting income is given below −

Conservatism

Where an income of one period may be shifted to another period for the measurement of income is called as ‘conservatism approach.’

According to the convention of conservatism, the policy of playing safe is followed while determining a business income and an accountant seeks to ensure that the reported profit is not over stated. Measurement of a stock at cost or market price, whichever is less is one of the important examples as applied to measurement of income. But it must be insured that providing excessive depreciation or excessive provisions for a doubt full debt or excessive reserve should not be there.

Consistency

According to this concept, the principle of consistency should be followed in accounting practice. For example, in the treatment of assets, liabilities, revenues, and expenses to insure the comparison of accounting results of one period with another period.

Therefore, the accounting profession and the corporate laws of most of the counties require that financial statement must be made out on the basis that the figures stated are consistent with those of the preceding year.

Entity Concept

Proprietor and business are the two separate and different entities according to the entity concept. For example, an interest on capital is business expenditure, but for a proprietor, it is an income. Thus, we cannot treat a business income as personal income or vice-versa.

Going Concern Concept

According to this concept, it is assumed that business will continue for a long time. Thus, charging depreciation on a Fixed Asset is based on this concept.

Accrual Concept

According to this concept, an income must be recognized in the period in which it was realized and costs must be matched with the revenue of that period.

Accounting Period

It is desirable to adopt a calendar year or natural business year to know the results of business.

Computation of Business Income

To compute business income, following are the two methods:

Balance Sheet Approach

Comparison of the closing values (Assets minus outsider’s liabilities) of a firm with the values at the beginning of that accounting period is called as Balance Sheet approach. In above value, an addition to capital will be subtracted and addition of drawings will be added while computing the business income of a firm. Since, income is calculated with the help of Balance Sheet hence called as Balance Sheet approach.

Transaction Approach

Transactions are mostly related to production or the purchase of goods and the sale of goods and all these transactions directly or indirectly related to the revenue or to the cost. Therefore, surplus collection of the revenue by selling goods, spent over for production or purchasing the goods is the measure of income. This system is widely followed by the enterprises where double entry system adopted.

Measurement of Business Income

There are following two factors which are helpful in the estimation of an income:

  • Revenues: Sale of goods and rendering of services are the way to generate revenue. Therefore, it can be defined as consideration, recovered by the business for rendering services and goods to its customers.
  • Expenses: An expense is an expired cost. We can say the cost that have been consumed in a process of producing revenue are the expired cost. Expenses tell us how assets are decreased as a result of the services performed by a business.

Measurement of Revenue

Measurement of the revenue is based on an accrual concept. Accounting period, in which revenue earned, is the period of revenue accrues. Therefore, a receipt of cash and revenue earned are the two different things. We can say that revenue is earned only when it is actually realized and not necessarily, when it is received.

Measurement of Expenses

  • In case of delivery of goods to its customers is a direct identification with the revenue.
  • Rent and office salaries are an indirect association with the revenue.

There are four types of events (given below) that need proper consideration about as an expense of a given period and expenditure and cash payment made in connection with those items:

  • Expenditure, which are expenses of the current year.
  • Some expenditure, which are made prior to this period and has become expense of the current year.
  • Expenditure, which is made this year, becomes expense in the next accounting periods. For example, purchase of fixed assets and depreciation in next up-coming years.
  • Expense of this year, which will be paid in next accounting years. For example, outstanding expenses.

Matching Concept

It is a problem of recognition of revenue during the year and allocation of expired cost to the period.

Recognition of Revenue

Most frequent criteria, which are used in recognition of the revenue are as follows:

  • Point of Sale: Transfer of ownership title to a buyer is point of sale, in case of sale of commodity.
  • Receipt of Payment: Criteria of cash basis is widely used by the attorneys, physicians, and other professionals in which revenue is considered to be earned at the time of collection of cash.
  • Instalment Method: Instalment method is widely used in retail trading specially in consumer durables. In this system, revenue earned is treated in the same manner as is used in any other credit sale.
  • Gold Mines: The accounting period in which gold is mined is the period of revenue earned.
  • Contracts: Degree of contract completion, especially in long term construction contracts is based on percentage of completion of a contract in a single accounting year. It is based on total estimated life of the contract.

Allocation of Costs

Matching of expired revenue and expired costs on a periodic time basis is the satisfactory basis of allocation of cost as stated earlier.

Measurement of Costs

Measurement of costs can be determined by:

  • Historical Costs: To determine periodic net income and financial status, historical cost is important. Historical cost actually means outflow of cash or cash equivalents for goods and services acquired.
  • Replacement Costs: Replacing any asset at the current market price is called as replacement cost.

Basis of Measurement of Income

Following are the two significant basis of measurement of income:

  • Accrual Basis: In an accrual basis accounting, incomes are recognized in a company’s books at the time when revenue is actually earned (however, not essentially received) and expenses is recorded when liabilities are incurred (however, not essentially paid for). Further, expenses are compared with revenues on the income statement when the expenses expire or title has been transferred to the buyer, and not at the time when the expenses are paid.
  • Cash Basis: In a cash basis accounting, revenues and expenses are recognized at the time of physical cash is actually received or paid out.

Change in the Basis of Accounting

We have to pass adjustment entries whenever accounting records change from cash basis to accrual basis or vice versa specially in respect of the prepaid expenses, outstanding expenses, accrued income, income received in advance, bad debts & provisions, depreciation, and stock in trade.

Features of Accounting Income

  • Matching revenue with related cost or expenses is a matter of accounting income.
  • Accounting income is based on an accounting period concept.
  • Expenses are measured in terms of a historical cost and determination of expenses is based on a cost concept.
  • It is based on a realization principal.
  • Revenue items are considered to ascertain a correct accounting income.

Development of Organizational Behaviour

The field of O.B. has developed from the studies conducted by behavioural scientists such as industrial psychologists, psychologists and sociologists. The focus of these studies lies in the understanding of the human behaviour in the organizations. The levels at which these studies have been carried out relate to individuals, the small group, the inter-group and the total organization as a socio – economic – technical system. Some studies have also examined the interaction of the organization with its environment. The discipline of OB is based on empirical studies of human behaviour at the work settings. On the other hand human relations is the study of behavioural knowledge in working to develop human motivation towards the attainment of organizational goals. Human relations is action oriented and goal directed approach.

According to Keith Davis the difference between the two is that of between a pathologist and the physician. While the pathologist attempts to understand human illness, the physician tends to employ that knowledge to gain results. Thus O.B. and human relations are complimentary to each other.

Behavioural scientists are focusing their attention on organizational theory, especially organizational adaptability, the relationship of organization structure to human behaviour and decision making. The study of managerial behaviour includes not only the tasks of getting things done through others but also why and how an individual behaves as he does. The specific questions which form the subject matter of O.B. are related to individual, interpersonal, small group and intergroup behaviour, interaction of formal organization and the informal groups and organization as a system, etc.

The predecessors of O.B. are:

  • Industrial psychology
  • Scientific management movement
  • Human relations movement
  1. Industrial psychology

Psychology is the “science of human (and also animal) behaviour because it collects facts about behaviour by utilizing methods of science”. Industrial psychology is simply the application or extension of psychological facts and principles concerning human beings operating within the context of business and industry. Industrial psychology draws upon the facts, generalizations and principles of psychology. It uses the methods from the parent discipline. Because it applies the techniques of psychology to the industrial scene and the problems confronting it, industrial psychology formulates and modifies procedures to meet the conditions found in the industry rather than in the laboratory.

Among the early names is that of Walter Dill Scot who opened up the beginning of industrial psychology in America by showing how psychology could be applied to advertising and selling. Edward K Strong Jr. branched industrial psychology into guidance on vocational interests. Hugo Munsteberg with this his researches into industrial accidents and his book “psychology and Industrial Efficiency”, published in 1913, put industrial psychology in to the study of the worker.

During World War I psychologists were quite active in the war effort, developing group tests for army recruits and aiding in the development of procedures for the selection of officer personnel. In fact, many of the post-war developmental areas of industrial psychology such as group testing, trade testing, rating scales, and the personality inventory had their roots in the activities of psychologists in the World War I efforts. During the post world war I era industry first began to show an interest in the discipline of industrial psychology. Certain firms such as Proctor & Gamble, the Philadelphia Company and the Hawthorn plant of Western Electric Co. formed their own personnel research programs. In fact, it was at the Hawthorne Western Electric Plant that the famous Hawthorne studies were begun in 1924. These studies provided the foundation and impetus for the expansion of Industrial Psychology beyond the realm of selection, placement and working conditions into the study of motivation and morale and human relations. The depression itself had considerable effect on the development of industrial psychology.

While it may have slowed growth in some directions, it nevertheless opened many additional areas for study. After the depression the importance of employee attitudes began to be recognized; consequently much development since that time has been in this area. World War II was also a major factor in the growth of psychology in industry. Although American Association for Applied Psychology was formed in 1937 as the official organization of industrial psychology, it was the huge psychological contribution to the war effort that proved to industry and others alike that applied psychology had important contributions to offer. Alongside also developed were various training programs of specialized types, and job analysis and performance appraisal techniques.

  1. Scientific management movement

Frederick W Taylor with his ideas, he called “scientific management”, created the interest in the worker and the supervisor. It was he who advocated parity of wages the internal as well as external parity. It was he who developed various wage payment plans. It was he who insisted on supervisory training in order to make supervisor a strong link between nonmanagement and the management group. F. W. Taylor also recognized the need for giving financial incentives to the workers and therefore developed incentive payments plans too. The changes he brought to the management thought paved the way for later development of O.B.

  1. Human relations movement

According to Fred Luthans three events cumulatively ushered in the era of human relations movement.

They are

  • The great depression
  • Rise of trade unionism.
  • The Hawthorne experiments

(a) The great depression

The economy was operating in the high gear just before the thundering financial crash occurred in 1929. The production and organizational specialists had achieved great results prior to the crash. After the crash the management began to realize that production could no longer be the only major responsibility of management. Marketing, finance and more importantly personnel were also required in order for a business to survive and grow. The depression’s after math of unemployment, discontent and insecurity brought to the surface the human problems that managers were now forced to recognize and cope with. Personnel departments were either created or given more importance and most managers now began to develop a new awakened view of the human aspects of their jobs. Thus human relations took an added significance, as an indirect, and in some cases direct.

(b) The rise of trade unionism

Another important factor contributing to the rise of human relation’s role of management was the organized labour movement. Although labour unions were in existence in America as early as 1792, it was not until the passage of Wagner Act in 1935 that the organized labour movement made an impact on management. In India, though workers’ unions existed since the later half of the 19th century, they operated under terrible legal constraints. It was only in 1926 with the passage of Trade Union Act 1926 that the managers began realizing that the trade unions had come to stay in spite of the wishes of the managers or for that matter management. The only go to avoid any probable friction with the trade union was to understand the human relations role of the management.

(c) Hawthorne experiments (From 1924 to 1933)

 Western Electric Co. conducted at its Hawthorne Works a research program or a series of experiments on the factors in the work situations which affect the morale and productive efficiency of workers. The first of these, the “Illumination Experiments”, was studied in cooperation with the National Research Council of the National Academy of Sciences. In the remainder of the studies, the company was aided and guided by the suggestions of Prof. Elton Mayo and his associates from Harvard University. Because of the large part that Harvard played in the project it is often referred to as the Hawthorne-Harvard Experiments or studies.

As Blum and Naylor in their treatise “Industrial Psychology” observed, “the Hawthorne studies are of utmost significance as they form an honest and concerted attempt to understand the human factor rarely understood in industry, recognizing the employee attitudes, his social situation on the job and his personal history and background”. The Hawthorne studies represent the pioneer attempts to make a systematic and intensive study of the human factor and to demonstrate the utmost complexity in work setting where people interact in small groups under varied organizational conditions. The studies point out that the needs for recognition, security and sense of belonging exert greater impact on workers’ productivity than the physical working conditions; that the attitudes and effectiveness of workers are determined by the social requirements obtained inside and outside the factory environment.

The Hawthorne works of the Western Electric Co., Chicago, manufactured equipment for the Bell Telephone system and employed 30,000 workers at the time of experiments. Although, in all material aspects, this was the most progressive company with pension and sickness schemes and numerous recreational and other facilities, there had been a great deal of employee discontent and dissatisfaction among its employees. After a failure of investigation conducted by efficiency experts of the company, in 1924, the company asked for the assistance of the National Academy of Sciences, which initiated its experiments with a view to examining the relationship between the workers efficiency and illumination in the workshop. Like any experimental design the researchers manipulated the independent variable (illumination) to observe its effects on the dependent variable (productivity) and attempted to hold other factors under control. The following are the broad segments of the study:

Illumination Experiments: 1924 to 1927

To study the effects of changed illuminations on work, two groups of employees were formed. In one group (control group) the illumination remained unchanged throughout the experiments whereas in other group (experimental group) the illumination was enhanced in intensity. As anticipated, the productivity in experimental group showed an improvement. But, strangely enough the output of the control group also went up. The researchers then proceeded to decrease the illumination for the experimental group. The output went up once more. This showed that some factor was operating which increased productivity (dependent variable) regardless of higher or lower intensity of light. Obviously, there was something much more important than wages, hours of work, working conditions, etc. which influenced productivity. Despite their negative results the illumination experiments did not end up in the waste paper basket but provided a momentum to the relay room phase of the studies.

Relay Room Experiments: 1927 to 1932

The relay room experiments that were initiated in 1927 represent the actual beginning of the Hawthorne studies conducted by Elton Mayo and his Harvard colleagues. Taking a cue from the preceding illumination experiments the researchers attempted to set up the test room and selected two girls for the experiments. These girls were asked to choose other four girls, thus making a small group of six. The group was employed in assembling telephone relays. Throughout the series of experiments that lasted over a period of five years, an active observer was sitting with the girls in the workshop. He recorded all that went on in the room, kept the girls informed about the experiments, asked for advice and listened to their complaints. The experiment started by introducing numerous changes each of which continued for a test period ranging from four to twelve weeks. Under normal working conditions with a forty-eight hour week and no rest pauses, each girl produced 2400 relays a week. These girls were then placed on piecework basis for eight weeks and productivity increased.

Next, two five minutes rest pauses were introduced and afterwards increased to ten minutes; productivity increased sharply. After this six five-minute breaks were introduced, there was a slight fall in the productivity as the girls complained that their work rhythm was broken because of these breaks. Therefore, again two five-minute pauses were introduced. The company provided a hot meal free of charge, the productivity increased.

The girls dispersed at four thirty instead of five p.m. and productivity increased. Subsequently, they were allowed to disperse at four p.m. and productivity still remained the same. After that all the amenities were withdrawn and the girls returned to their normal working conditions with a forty eight-week, including Saturdays, no rest breaks, no piecework and no free meals. This remained for a period of twelve weeks and the productivity was the highest ever achieved.

These results imply that productivity increased basically because of a change in the girls’ attitudes towards their work and their work groups. They were made to feel important by soliciting assistance and cooperation. They were no longer cogs in a machine but formed congenial group attempting to assist the company to solve a problem. A feeling of stability and a sense of belonging grew. Therefore, they worked faster and better than before. Medical examination conducted regularly revealed no symptoms of cumulative fatigue. Absenteeism also decreased by eighty percent. It was also observed that girls employed their own techniques of assembling the parts of relays together to avoid monotony. The girls were also given freedom of movement. Under the circumstances the group developed a sense of responsibility and self-discipline. It was concluded that the independent variables i.e. rest etc. were not by themselves causing the variations in the dependent variable i.e. productivity.

Second Relay Room and Mica Splitting test room experiments

These studies were conducted as a follow up measure. The researchers set up the second relay assembly group to assess the effects of wage incentives on productivity. A group of five workers with adequate experience were shifted to similar positions in the regular department, the nature of supervision, general working conditions and the work setting were similar to those of other workers in the regular department. The difference was that the assemblers in the second relay group were engaged on a different, small group piece rate scheme. This arrangement led to a twelve percent rise in productivity of the experimental group.

In the Mica Splitting study, although the isolated test room conditions of the original relay study were reproduced, the workers were engaged under their normal individual piece rate plan rather than small group incentive schemes employed with the lay room experimental subjects. The results revealed an average increase of fifteen percent of productivity during a period of fourteen months. The outcome of these two studies was quite vague. As Rothlisberger & Dickson in their concluding remarks observed, “there was no evidence to support the hypothesis that the constant rise in the productivity in the relay assembly test room could be attributed to the wage incentives variable alone.” It was concluded that the efficacy of a wage incentive scheme was so dependent on other variables as well that it could not be considered as the sole factor to affect the worker.

Mass Interviewing Program: 1928-1930

Another major aspect of the Hawthorne studies consisted of 21,000 interviews carried out during 1928 to 1930. The original objective was to explore information, which could be used to improve supervisory training. Initially, these interviews were conducted by means of direct questioning. However, this method had the disadvantages of either stimulating antagonism or the over simplified yes or no responses, which could not get to the root of the problems. Therefore, the method was changed to “non-directive” interviewing where the interviewer was to listen instead of talk, argue or advice, and take on the role of confidant. On the basis this interviewing program, the following inferences were drawn.

  • Only giving a person an opportunity to talk and air his grievances had a positive impact on his morale.
  • Complaints were no longer necessarily objective statements job facts. Rather, they were frequently symptoms of more deep-rooted disturbances.
  • Workers were governed by the experiences obtained, both inside and outside the company in respect of their demands
  • The worker is satisfied or dissatisfied depending upon how he regarded his social status in the company and what he felt he was entitled to rather than in terms of any objective reference.

Bank wiring room study: Nov 1931 to May 1932

The chief objective was to conduct an observational analysis of the work group.

There were fourteen men employed on “bank wiring”. This was the process where two lose wire ends were soldered. This group of fourteen employees included nine wiremen, three soldermen and two inspectors. The job involved attaching wires to switches for certain parts of telephone equipment. Because of some practical difficulties the study was conducted in a separate test room. However, the study involved no experimental changes once it had started, it was carried out by two persons – an observer and an interviewer. The observer sat in the wiring room being friendly but appeared non-committal. Thus, he won the confidence of the group and was accepted as a regular member.

The interviewer, however, remained an outsider and his task was to explore as much as possible by interviewing the individual worker about his thought and feeling, his values and attitudes etc. He carried out his work under strict confidence, privately and in a different part of the factory. Although he never entered the wiring room, he kept in constant touch with observer. Besides these arrangements, other conditions were identical with the Bank wiring department itself in-so-far as that even the department’s regular supervisors were used the Bank wiring room to maintain order and control.

The results of the Bank wiring room which are markedly opposite to those obtained Relay Room, revealed that this small group of workers emerged as a team with informal leaders who had come up spontaneously.

The group was indifferent towards the financial incentives of the factory because despite the incentive scheme, the output was neither more nor less than 6000 units although optimum capacity was 7000 units per day. It may be noted that whenever any worker attempted to produce more than this group determined quota, he was soon compelled to return to his original output. To do this, the group invented a game known as “binging”. The group norms were more important to the group members than any financial incentive. There prevailed an unwritten code of conduct, which determined a fair day’s work and had influence over the group members. Thus, there existed a highly integrated group in the Bank wiring room, which possessed its own social system contradictory to the objectives of the factory. This implied that it would be irrational to break up these groups. Rather, attempts should be made to see that the interests of the management and workers are identical to such an extent that these informal groups facilitate the achievement of the organization’s objectives rather than obstructing them.

Implications of the Hawthorne Studies

Why were such contradictory results obtained in the Relay room and the Bank wiring room?

As pointed out earlier, in the relay room production constantly increased throughout the test periods and relay assemblers were greatly motivated and equipped with positive attitudes whereas, in the Bank wiring room there prevailed a restriction of production among dissatisfied workers who displayed negative attitudes towards the objective of the factory. Why? The answer to this question can be found in the reactions of the girls to the Relay test room. They unanimously showed marked preference for working in the test room rather than in the regular department, because of small group, nature of supervision, earnings, novelty of situation, interest in the experiment and attention received in the test room. It may be noted that the last three reasons are related to the well-known “Hawthorn effect”. Numerous behavioural scientists tend to overlook the significance of the first three reasons and are of the opinion that the phenomenal increase in the productivity in the relay room can be attributed primarily to this effect.

It may be noted that the Relay room and the Bank wiring room studies differed in the supervisory aspects. Although in the Relay room there were no regular supervisors engaged, the girls assigned the second priority to nature of supervision which prompted them to increase production and made them feel happier. They regarded the friendly, attentive and genuinely interested.

Need of Organizational Behaviour

Organizational behavior is indispensable for organizations seeking to thrive in today’s complex and competitive business landscape. From enhancing employee performance to fostering effective communication, managing change, building effective teams, and promoting diversity and inclusion, OB addresses a wide range of organizational challenges and opportunities. By applying insights from OB research and practice, organizations can optimize their human capital, cultivate a positive work environment, and achieve sustainable success in the long term.

  • Enhancing Employee Performance:

One of the primary reasons for the importance of OB is its role in enhancing employee performance. By understanding individual behavior, motivations, and attitudes, organizations can design jobs and tasks that align with employee skills and interests. Additionally, OB helps in identifying factors that contribute to employee satisfaction and engagement, such as fair compensation, opportunities for growth, and a positive work environment. When employees are motivated and engaged, they are more likely to perform at their best, leading to increased productivity and organizational success.

  • Improving Organizational Communication:

Effective communication is vital for the smooth functioning of an organization. OB provides insights into communication patterns, barriers, and strategies within the workplace. By understanding the dynamics of communication, organizations can foster open channels of communication, encourage feedback and collaboration, and minimize misunderstandings and conflicts. Clear and transparent communication contributes to better coordination, decision-making, and overall organizational effectiveness.

  • Managing Organizational Change:

In today’s dynamic business environment, organizational change is inevitable. Whether it’s due to technological advancements, market shifts, or internal restructuring, organizations must adapt to change to remain competitive. OB helps in understanding how individuals and groups react to change and how to effectively manage the change process. By addressing resistance, providing support, and fostering a culture of flexibility and innovation, organizations can navigate change more successfully and minimize disruptions to productivity and morale.

  • Building Effective Teams:

Teams are a fundamental unit of organizational functioning, and their effectiveness can significantly impact organizational performance. OB provides insights into team dynamics, such as roles, norms, communication patterns, and conflict resolution strategies. By understanding these dynamics, organizations can build high-performing teams that leverage individual strengths, promote collaboration, and achieve collective goals. Effective teams contribute to innovation, problem-solving, and organizational resilience.

  • Enhancing Leadership Effectiveness:

Leadership plays a critical role in shaping organizational culture, motivating employees, and driving performance. OB helps in understanding leadership styles, behaviors, and practices that contribute to effective leadership. By providing leadership training and development opportunities, organizations can cultivate leaders who inspire trust, empower employees, and foster a culture of accountability and continuous improvement. Effective leadership strengthens employee morale, promotes organizational alignment, and drives strategic execution.

  • Promoting Diversity and Inclusion:

Diversity and inclusion have become increasingly important considerations for organizations seeking to leverage the full potential of their workforce. OB provides insights into how diversity impacts organizational dynamics and effectiveness. By promoting diversity and inclusion initiatives, organizations can tap into a broader range of perspectives, experiences, and talents, leading to enhanced creativity, innovation, and problem-solving. Moreover, inclusive workplaces foster a sense of belonging and mutual respect, which contributes to employee engagement and retention.

  • Ensuring Ethical Behavior:

Ethical conduct is essential for building trust with stakeholders, maintaining organizational reputation, and fostering a positive organizational culture. OB helps in promoting ethical behavior by examining individual and organizational values, ethical decision-making processes, and the influence of organizational structures and incentives. By establishing ethical codes of conduct, providing ethics training, and creating mechanisms for reporting unethical behavior, organizations can cultivate a culture of integrity, accountability, and social responsibility.

Organizational Behavior Models

Organizational Behaviour (OB) is the study of how individuals and groups act within organizations. It focuses on understanding, predicting, and managing human behavior to improve organizational effectiveness, employee well-being, and workplace dynamics through theories and models addressing motivation, leadership, teamwork, and culture.

Models of Organizational Behaviour provide frameworks to understand, predict, and manage how individuals and groups act within organizations.

Classical Model:

The classical model of organizational behavior emerged during the late 19th and early 20th centuries, focusing on principles of scientific management and bureaucracy.

  • Scientific Management:

Developed by Frederick Taylor, scientific management emphasizes efficiency and productivity through systematic analysis and optimization of work processes. It suggests that workers can be motivated primarily by financial incentives and that management should control and coordinate all aspects of work.

  • Bureaucratic Theory:

Proposed by Max Weber, bureaucratic theory emphasizes hierarchical structure, formal rules and procedures, and impersonal relationships within organizations. It advocates for a rational, rule-based approach to organizational management.

Human Relations Model:

The human relations model emerged as a response to the limitations of the classical model, emphasizing the importance of social and psychological factors in shaping employee behavior.

  • Hawthorne Studies:

Conducted at the Hawthorne Works of Western Electric in the 1920s and 1930s, the Hawthorne studies demonstrated the significance of social factors such as group norms, communication patterns, and informal interactions in influencing worker productivity and satisfaction.

  • Maslow’s Hierarchy of Needs:

Abraham Maslow proposed a hierarchy of human needs, ranging from physiological needs (e.g., food, shelter) to self-actualization needs (e.g., personal growth, fulfillment). According to Maslow, individuals are motivated to fulfill lower-level needs before progressing to higher-level needs.

Systems Model:

The systems model views organizations as complex systems composed of interconnected and interdependent parts.

  • Open Systems Theory:

Open systems theory emphasizes the dynamic interaction between organizations and their external environment. Organizations receive inputs from the environment, transform them through internal processes, and produce outputs that are returned to the environment. This model highlights the importance of adaptation and flexibility in response to environmental changes.

  • Contingency Theory:

Contingency theory suggests that there is no one-size-fits-all approach to organizational management. Instead, the most effective organizational practices depend on the unique characteristics of the situation or context. Contingency theorists argue that organizations must adapt their structures, processes, and strategies to fit the specific demands of their environment.

Behavioral Model:

The behavioral model focuses on understanding individual and group behavior within organizations, drawing insights from psychology and sociology.

  • Theory X and Theory Y:

Douglas McGregor proposed two contrasting theories of human motivation. Theory X assumes that employees are inherently lazy and require strict control and coercion to perform, while Theory Y assumes that employees are self-motivated, responsible, and capable of self-direction.

  • Two-Factor Theory (Herzberg):

Frederick Herzberg’s two-factor theory distinguishes between hygiene factors (e.g., salary, working conditions) and motivators (e.g., recognition, responsibility). Hygiene factors are necessary to prevent dissatisfaction, while motivators are necessary to promote satisfaction and intrinsic motivation.

Social Cognitive Theory:

Social cognitive theory emphasizes the role of cognitive processes, social learning, and self-regulation in shaping individual behavior.

  • Social Learning Theory (Bandura):

Albert Bandura proposed social learning theory, which suggests that individuals learn by observing others’ behavior, attitudes, and outcomes. Bandura introduced the concept of self-efficacy, or individuals’ beliefs in their ability to succeed in specific tasks or situations.

  • Goal-Setting Theory:

Goal-setting theory emphasizes the importance of setting clear, challenging, and specific goals in motivating individuals and improving performance. According to this theory, goals direct attention, mobilize effort, and foster persistence, leading to higher levels of performance.

Organizational Culture Model:

The organizational culture model focuses on the shared values, beliefs, norms, and assumptions that shape organizational behavior and identity.

  • Schein’s Three Levels of Culture:

Edgar Schein proposed three levels of organizational culture: artifacts and symbols (visible manifestations of culture), espoused values (stated beliefs and norms), and basic underlying assumptions (unconscious, taken-for-granted beliefs). Schein emphasizes the importance of understanding the deeper layers of culture to enact meaningful change.

  • Cultural Dimensions (Hofstede):

Geert Hofstede identified several cultural dimensions that influence organizational behavior, including power distance (the extent to which power is distributed unequally), individualism vs. collectivism, masculinity vs. femininity, uncertainty avoidance, and long-term vs. short-term orientation.

Transactional Leadership Model:

Transactional leadership focuses on the exchange relationship between leaders and followers, emphasizing contingent rewards and punishments.

  • Contingent Reward:

Transactional leaders use contingent rewards, such as praise, recognition, or tangible incentives, to motivate followers and reinforce desired behaviors. They also use contingent punishment to correct undesirable behaviors.

Transformational Leadership Model:

Transformational leadership focuses on inspiring and empowering followers to achieve higher levels of performance and commitment.

  • Charisma and Vision:

Transformational leaders inspire followers through their charisma, vision, and passion. They articulate a compelling vision for the future and mobilize support for that vision through effective communication and persuasion.

  • Individualized Consideration:

Transformational leaders provide individualized support, mentoring, and coaching to develop followers’ potential and foster personal growth and development.

Components of Perception

Perception is a process of sensory organs. The mind gets information through the five sense organs, viz., the eyes, ears, nose, tongue and skin. The stimulation coming to these organs may be through action, written messages, oral communication, odour, taste, touch of the product and people. The perception starts with the awareness of these stimuli. Recognizing these stimuli takes place only after paying attention to them. These messages are then translated into action and behaviour.

  1. Stimuli

The receipt of information is the stimulus, which results in sensation. Knowledge and behaviour depend on senses and their stimulation. The physical senses used by people are vision, hearing, touch, smell and taste. Intuitions and hunches are known as the sixth sense. These senses are influenced by a larger number of stimuli, which may be action, information, consideration and feelings, etc.

The stimuli may be in the form of objects or physical commodities. The human body itself is developed through the acceptance of the stimuli. The mind and soul are the victims of these stimuli occurring in the surroundings of the people. The family, social and the economic environment are important stimuli for the people. The physiological and psychological functions are the result of these stimuli.

The intensive and extensive forms of stimuli have a greater impact on the sensory organs. The physical work environment, sociocultural environment and other factors have certain stimuli to influence the employee’s perception. In all, the perception begins only when people deal with stimuli; that is, stimulating factors give information about the situation.

  1. Attention

People selectively attend to stimuli. Some of the stimuli are reacted to while others are ignored without being paid any attention. The stimuli that are paid attention depend purely on the people’s selection capacity and the intensity of stimuli. Educated employees pay more attention to any stimuli, viz., announcement of bonus, appeal for increasing productivity, training and motivation. The management has to find out suitable stimuli, which can appeal to the employees at the maximum level.

If the attention of the employees is not drawn, the organization cannot expect proper behaviour from the employees. An organization should be aware of all those factors, which affect the attention of the employees. During the attention process, sensory and neural mechanisms are affected and the message receiver becomes involved in understanding the stimuli. Taking employees to the attention stage is essential in an organization for making them behave in a systematic and required order.

  1. Recognition

After paying attention to the stimuli, the employees try to recognize whether the stimuli are worth realizing. The messages or incoming stimuli are recognized before they are transmitted into behaviour. Perception is a two-phase activity, i.e., receiving stimuli and translating the stimuli into action. However, before the stage of translation, the stimuli must be recognized by the individual.

The recognition process is dependent on mental acceptability. For example, if a car driver suddenly sees a child in front of his running car, he stops the car. He recognizes the stimuli, i.e., the life of the child is in danger. His mental process recognizes the danger after paying attention to the stimuli. If he does not pay attention to the stimuli, he cannot recognize the danger. After recognizing the stimuli, he translates the message into behaviour.

  1. Translation

The stimuli are evaluated before being converted into action or behaviour. The evaluation process is translation. In the above example, the car driver after recognizing the stimuli uses the clutch and brake to stop the car. He has immediately translated the stimulus into an appropriate action. The perception process is purely mental before it is converted into action. The conversion is translation. The management in an organization has to consider the various processes of translating the message into action. The employees should be assisted to translate the stimuli into action.

For example, the announcement of bonus should be recognized as a stimulus for increasing production. The employee should translate it into appropriate behaviour. In other words, they should be motivated by the management to increase productivity. During the translation period, psychological mechanism commonly known as sensory and mental organs is affected. They influence perception. The incoming stimuli are interpreted and perception is developed.

  1. Behaviour

Behaviour is the outcome of the cognitive process. It is a response to change in sensory inputs, i.e., stimuli. It is an overt and covert response. Perceptual behaviour is not influenced by reality, but is a result of the perception process of the individual, his learning and personality, environmental factors and other internal and external factors at the workplace.

The psychological feedback that may influence the perception of an employee may be superior behaviour, his eye movement, raising of an eyebrow, the tone of voice, etc. The behaviour of employees depends on perception, which is visible in the form of action, reaction or other behaviour. The behavioural termination of perception may be overt or covert.

The overt behaviour of perception is witnessed in the form of physical activities of the employees and covert behaviour is observed in the form of mental evaluation and self-esteem. The perception behaviour is the result of the cognitive process of the stimulus, which may be a message, or an action situation of management function. Perception is reflected in behaviour, which is visible in different forms of employees’ action and motivation.

  1. Performance

Proper behaviour leads to higher performance. High performers become a source of stimuli and motivation to other employees. A performance-reward relationship is established to motivate people.

  1. Satisfaction

High performance gives more satisfaction. The level of satisfaction is calculated with the difference in performance and expectation. If the performance is more than the expectation, people are delighted, but when performance is equal to expectation, it results in satisfaction. On the other hand, if performance is less than the expectation, people become frustrated and this requires a more appealing form of stimulus for developing proper employee work behaviour and high performance.

It is essential to understand the factors that influence the perception process and mould employees’ behaviour towards the corporate objectives and self-satisfaction. Individuals observe several stimuli every day. They confront these stimuli, notice and register them in their minds, interpret them and behave according to their background and understanding.

Employees confronted with stimuli select only a few stimuli of their choice and leave other stimuli unattended and unrecognized. Factors influencing the selective process may be external as well as internal, organizational structures, social systems and characteristics of the perceiver.

Measurement of Personality

  1. Subjective Methods

(a) Observation

Observation of behaviour of a person over a long period is one of the techniques of assessing personality traits.

(b) Case Study Method

In this method the case history has to be re-organized and re-written from infancy upto adulthood. Really speaking, on the basis of this method, the reality of the personality is found out.

(c) Interview

It is a process of communication or interaction in which the interviewee gives the needed information verbally to the interviewer in a face-to-face situation or one-to-one situation.

(d) Autobiography

Autobiography method is also used to assess personality. The child is asked to write his own autobiography and certain personality characteristics can be studied from them.

(e) Cumulative Record Card

The cumulative record is a useful and permanent record which includes various information about the child.

  1. Objective Methods

Following are some objective methods of personality measurement that eliminate the subjectivity of interpretation:

(a) Rating Scales

Rating scales are used to rate the various personality traits, adjustment, emotions, interests, attitudes performance on a task.

(b) Check lists

Carefully prepared check list can be employed to collect data about a person.

(c) Controlled Observation

Controlled observation under laboratory conditions or under controlled conditions can be used to study certain aspects of the personality of an individual.

(d) Sociogram

With the help of this method, the sociability of the subject is measured. With the help of this method relationship of the students is judged.

(e) Personality Inventories

Ari individual’s written account of the past behaviour, feelings and wishes can be a good source of information about his personality. Self-ratings can be done through personality inventories and paper and pencil test.

Some popular personality inventories are:

  • California Tests of Personality
  • Minnesota Multiphasic Personality Inventory (MMPI)
  • Bell’s Adjustment Inventory
  • Woodworth Personal Data Sheet
  • Edward Personal Preference Schedule
  • Cornell Index
  • Boyd’s Personality Questionnaire
  • Guilford-Zimmerman Temperament Survey
  • Minnesota Counselling Inventory
  • Thurstone Temperament Schedule
  • Eysenck’s Personality Inventory
  • The Shipley Personal Inventory
  • P.P. Personality Inventory Test
  • Comrey Personality Scales
  • Saxena’s Personality Inventory
  • Mittal’s Adjustment Inventory
  1. Projective Methods

These techniques enable a subject to project his internal feelings, attitudes, needs, values or wishes to an external object. In the projective test situation, the individual responds freely to relatively unstructured yet standard situation to which he is asked to respond.

Some of the major projective techniques are:

(a) Thematic Apperception Test (TAT)

The TAT was developed by Morgan and Murray in 1935. It requires the subject to look at the picture and to interpret it by telling a story. He is invited to say what led up to the scene in the picture. Why such events occurred, and what the consequences will be?

(b) Children’s Apperception Test (CAT)

It was developed by Leopold Bellak. The test consists of ten pictures meant for children of the age group 3 to 10. Pictures are shown one after another and reactions (responses) are noted and interpreted.

(c) Rorschach’s Ink-Blot Test

This test was developed by Hermann Rorschach in 1921. It uses ten irregular-ink-blots standing against a white background. Each inkblot is shown in a fixed number of ways and the testee is asked to report what he sees.

(d) Projective Questionnaires

In this technique the subject is given a series of questions to answer in his own way. Through such questionnaires it is possible to obtain information regarding the subject’s emotional life, his values, his attitudes and sentiments.

(e) Sentence Completion Test

These tests present a series of incomplete sentences to be completed by the testee in one or more words.

Some sample items are given below:

  • I am worried over………….
  • I feel proud when………….
  • My hope is…………….
  • I am afraid of………………

(f) Psychodrama

It requires the subject to play spontaneously a role assigned to him in a specific situation. Psychodrama deals with interpersonal relationships and maladjustment problem within the individual.

(g) Drawing, Painting and Sculpture

Artistic productions can also be used as projective techniques.

  1. Psycho-Analytic Methods

(a) Word Association Test

In such test the subject is presented a list of words, one at a time and is asked to give the first word that comes to his mind. The responses given by the subject and the time taken by him are recorded by the tester for interpretation.

(b) Free Association Test

In this test the subject is allowed to talk for hours together and from it certain traits and behavioural problems are noted.

(c) Dream Analysis

In this technique the dream of the subject is analysed and unconscious behaviour is interpreted. Since ‘Dream is the royal road to unconscious’, the dream analysis is an effective psychoanalytic method to locate unconscious behaviour of the individual.

error: Content is protected !!