Guidelines for Interviewer and interviewee
02/06/2020Step 1: Profile the position functions
The key to effective interviewing and hiring is the establishment of functions. By deciding upon the essential functions of the position, you will be able to determine the job’s specific requirements.
Essential Functions are defined as the basic job duties that an employee must be able to perform satisfactorily. Carefully examine each job to determine which functions are essential to satisfactory performance.
Factors to consider in determining if a function is essential include:
- Whether the performance of the functions is one of the reasons the position exists
- The number of other employees available to perform the function or among whom the performance of the function can be distributed
- Consequences of not requiring that an employee perform the function
- The degree of expertise or skill required to perform the function
- Time spent performing the function
- The actual work experience of a present or past employee in the job
Step 2: Establish specific requirements
Determine the specific skills, knowledge, ability, experience, etc. needed by the applicant to fulfill each function.
To gain a clear understanding of these requirements, try to categorize them according to those items that are behavioral in nature and those that are technical. “Technical” requirements refer to specific skills or experience that the position demands. “Behavioral” requirements refer to how a person needs to act in order to fulfill a given responsibility (e.g. self-motivated or well organized). Please note that behavioral requirements must be defined in behavioral terms. For example, rather than listing “good communication skills” as a requirement for a position interacting with disgruntled students, it would be better to list “the ability to listen and respond to students’ complaints effectively.”
Step 3: Establish your priorities
The last step is the establishment of priorities in your requirements. You want to ensure that in an interview you will gain information about the essential requirements. Categorize your requirements according to critical (“must haves”/non-negotiable) and desirable (“want to haves”/can be acquired on the job).
Critical requirements are those you absolutely must have. Desirable requirements, secondary selection criteria, are attributes you would like an applicant to possess in addition to the critical requirements. Desirable requirements can generally be learned on the job.
Step 4: Contact your HR Employment Services Consultant/Recruiter
Set aside time at this point to develop an understanding of the position, settle any questions regarding special requirements, and define selection criteria. Ask any questions you may have about the position regarding your selection criteria, special requirements, applicants referred, interview questions, and/or the interview process.
Step 5: Choose a diverse selection committee
The selection committee will help you pick the candidate best suited for the position and for the unit overall. Select committee members and a chairperson based on the following criteria, keeping diversity within the panel in mind:
- Vested interest in the responsibilities of the position
- Knowledge of the goals of the unit or office
- Working relationships
- Supervisory responsibilities
- Campus interaction
Step 6: Have a plan
Review the position description to identify skills, knowledge and abilities essential for successfully performing the job. Develop a set of carefully thought-out interview questions based on the predetermined selection criteria and functional areas listed on the position description. Your Employment Services Consultant/Recruiter can also help you develop job-related questions. Prepare another list of questions to use when checking references for finalists.
You may use these as a resource during an interview:
- Sample of Interview Questions
- Interview Rating Scale – Managers/Supervisors
- Interview Rating Scale – Staff
Step 7: Screen carefully
Note: The Employment Services unit will review and screen applications against the criteria stated in the position description before referring to the department. After the final filing date, referrals will be forwarded to the department contact identified on the requisition.
The selection committee must screen applications for the most appropriately qualified applicants to interview. After applicants are selected, the committee members should review their applications again to pinpoint areas where additional information may be needed or can be clarified during the interview. Prepare key areas of inquiries for all applicants.
Step 8: Contact the applicants
The committee chairperson will contact the applicants for an interview and advise them of the time, date, location, expected length of the interview, parking availability, and interview procedures. You may also want to ask the applicants to bring any additional information they would like to share, such as performance evaluations, reference letters or work samples. Please contact your Employment Services Consultant/Recruiter for more information.
Step 9: Interviewing
The following guidelines are provided as an aid in complying with university policy and procedures and with federal and state laws. Before the interview, take a few minutes to review the job application materials.
(a) Create a relaxed interview setting
The interview setting should be quiet, comfortable, and free of distraction and any other kind of interruption. If you use an office, arrange for phone calls be forwarded to another line. Keep on schedule, as candidates become apprehensive when asked to wait.
Ask each candidate to arrive 10-15 minutes before the interview. Give them a copy of the position description and any other materials you feel are important before the interview, such as an organizational chart, agenda for the interview, and a list of the selection committee members with their titles. Allow at least 15 minutes between interviews to permit candidates to come and go without overlap, and to allow the committee members to evaluate a candidate’s responses to questions.
(b) Follow a logical sequence
Keep the same format for each candidate and allow an equal amount of time for each candidate to answer questions. Introduce the candidate to the rest of the committee and invite him or her to be seated. Provide information regarding the expected timeframe for filling the position and what the interview is meant to accomplish. You can briefly define the job responsibilities.
(c) Let the candidate do the talking
After defining the job responsibilities, let the candidate “do the talking.” It is extremely important to listen and concentrate on what they are saying. The candidate should carry 80-85 percent of the total conversation. The panel members’ input should be limited to asking questions, probing deeper, and keeping the candidate on track. The panel should clear up points on the application form, asking follow-up questions that encourage the candidate to talk. Ask only questions that are directly related to the job. Use “W” questions — who, what, when, where, and why; also, how? Several types of questions are useful:
- Direct questions are easy to understand, and are more likely to yield concise answers and specific information. Example: “Why did you apply for this position?”
- Open ended questions often produce unexpected and valuable information, may reveal attitudes and feelings, and can indicate how well an applicant can organize his or her thoughts. Example: “Tell us about your job at XYZ Corp.”
- Behavioral questions require a candidate to analyze a situation and can reveal the extent of their experience. These questions must be specifically related to the job functions discussed in the position description. Example: Describe an experience when you…
- Probing questions such as “Could you explain what you mean by …?” can further clarify the candidate’s views.
Allow silence after asking a question so that you don’t interrupt the candidate’s thinking process. Encourage candidates with “take your time, we want you to be specific.”
(d) Be mindful of your questions
Formulate questions that indicate whether or not a candidate meets the requirements you have established for the position. Keep three rules in mind:
Ask questions that focus on past employment performance. Avoid questions that address the candidate’s personal lifestyles or habits.
Ask questions that relate to your listed skill, ability, knowledge or experience requirements.
Ask the same questions of all candidates.
Avoid:
- Closed questions that require merely a yes or no response.
- Multiple questions that require several answers.
- “Loaded” questions that force a choice between two alternatives.
- Questions that are illegal and dealing with areas that are not factors for job performance, such as gender (if you would not ask a question of a man, do not ask it of a woman, and vice versa), age, race, religion, veteran status, marital status, medical conditions and disability (it is illegal to ask about the nature and/or severity of the disability, if the applicant will need treatment or special leave, or about any prognosis or expectation regarding the condition or disability). Contact your Employment Consultant/Recruiter if you have questions.
(e) Close on a proper note
After the committee members have explored all performance factors, they can ask the candidate if he or she has any questions, needs clarification, or anything to add. Thank the candidate for coming, and explain when a decision will be made, whether a second interview will be conducted, and how candidates will be notified. Remember to smile, shake hands, and lead the candidate to the door.
Step 10: Check references
- Verify employment
- Verify what you have learned during the interview
- Obtain employment recommendations
References should always be checked regardless of your impression of the interviewed candidate’s qualifications. Reference checks should be conducted for every finalist, after you have completed your interviews. A list of job-related questions should be developed ahead of time to ensure consistency and fairness to all candidates. Responses can be used in consideration only if documented. Ask, “is this information documented or a matter of record?”
If the candidate is a current employee, you may review the employee’s personal file in Human Resources. Please contact your Employment Consultant/Recruiter for information regarding this review. If you review the candidate’s personnel record file, be mindful of how the information is to be used. Compare information that relates to the new position in terms of skills, knowledge, and abilities. Also, be aware that aged information that speaks unfavorably may no longer reflect the candidate’s attributes. Check current references to ensure fairness to the candidate.
Step 11: Make your selection
All information obtained in the interviews should be kept confidential. Evaluate the candidate solely on what you learned in the interview, the candidate’s responses to interview questions and information gathered during the reference check. Each panel member should ask themselves “would I hire this person with reasonable confidence that they could handle the job successfully?” Select the candidate who has the qualifications to perform the duties of the position effectively.
Step 12: Decide on a salary
New hires: In general, a department can make an offer up to the mid-point of the salary range for new hires . Any salary above these levels will be by exception only and requires the approval of Employment Services/HR before a hiring commitment can be made. Salary request letters should outline candidates background as it relates to the position, recruitment difficulty, salary history, candidate’s experience in relation to placement within a salary range, and relationship to internal employees in the same classification (salary equity among internal employees is an important consideration when setting salaries). Offers of employment above midpoint for non-covered range positions require Employment Services unit approval prior to the salary offer. You must always check with internal protocol(s) established for funding issues. For SMG positions, please consult your SMG Coordinator.
Current Employees: In general, a employee who is promoted to a step-based position with a higher salary range maximum may receive a salary increase to the minimum of the new salary range or the equivalent of a one-step increase, whichever is greater, provided that the resultant salary does not exceed the maximum of the new salary range. Please consult with your Employment Consultant/Recruiter regarding collective bargaining stipulations prior to a job offer. For non-represented positions, a employee who is promoted to a position with a grade-based salary range may receive a salary increase from 0-25 percent, provided that the resultant salary does not exceed the maximum of the new salary range and all combined salary actions do not exceed 25 percent within a fiscal year. Please consult with your Employment Consultant/Recruiter prior to making a job offer.
An employee who transfers laterally into a position with an equivalent salary range typically does not receive a change in salary. Consult with your Employment Consultant/Recruiter regarding policy and collective bargaining stipulations prior to salary offer.
Step 13: Complete the recruitment process
Good personnel practices are:
- Follow any internal protocol established for your unit/college/service area.
- Touch base with your Employment Consultant/Recruiter to advise of your selection and to discuss salary offers.
- Call the successful candidate to offer the position.
- Follow up with a confirmation of the offer, acceptance, salary, title and starting date, etc.
- A candidate has the right to know the reason(s) for not being selected; however, reason should be suggested by selection criteria based on the position description.
- Provide justification for hire/non hires to withstand internal or external audit.
[…] VIEW […]