- The exchange of goods and services are known as …………………………
- Domestic Trade
- International Trade
- Trade
- None of these.
- Which of the following is not considered as factors of production?
- Land
- Labour
- Money
- Capital
- Trade between two countries is known as ………….
- External
- Internal
- Inter-regional
- None of Above
- International Trade is most likely to generate short-term unemployment in:
- Industries in which there are neither imports nor exports
- Import-competing industries
- Industries that sell to domestic and foreign buyers.
- Industries that sell to only foreign buyers
- Free traders maintain that an open economy is advantageous in that it provides all the following except:
- Increased competition for world producers
- A wider selection of products for consumers
- Relatively high wage levels for all domestic workers
- The utilization of the most efficient production methods
- Which of the following is not a benefit of international trade?
- Lower domestic prices
- Development of more efficient methods and new products
- A greater range of consumption choices
- High wage levels for all domestic workers
- Which is not an advantage of international trade:
- Export of surplus production
- Import of defence material
- Dependence on foreign countries
- Availability of cheap raw material
- Trade between two countries can be useful if cost ratios of goods are …………..
- Equal
- Different
- Undetermined
- Decreasing
- Foreign trade creates among countries ………………
- Conflicts
- Cooperation
- Hatred
- Both a. and b.
- All are advantages of foreign trade except ………….
- People get foreign exchange
- Cheaper goods
- Nations compete
- Optimum utilization of countries’ resources
Q.2. Fill in the blanks.
- International Trade means trade between …………………. (Provinces/ Countries/ Regions)
- Two countries can give from foreign trade if ………… are different. (Effect/ Tariff/ Cost)
- ………….. encourages trade between two countries. (Different tax system/Reduced tariffs/ National currencies)
- Drawback of protection system is ……… (Consumers have to pay higher prices/ Producers get higher profits/ Quality of goods may be affected/ All above)
- ………….. is a drawback of free trade. (Prices of local goods rise/ Govt. looses incomes from custom duties/National resources are underutilized)
- International trade is possible primarily through specialization in production of …… goods. (All/ One/ Few)
- A country that does not trade with other countries is called …… country. (Developed/ Closed/ Independent)
- Policy of Protection in trade ……… (Facilitates trade/ Protects foreign producers/ Protects local producers/ Protects exporters)
- The largest item of Indian import list is ……….. (Consumer goods/ Machinery/ Petroleum/ Computers)
- Trade between two states in an economy is known as …… (External/ Internal/None)
SET 2
Q.1. Multiple Choice Questions.
- Who among the following enunciated the concept of single factoral terms of trade?
- Jacob Viner
- G.S.Donens
- Taussig
- J.S.Mill
- ‘Infant industry argument’ in international trade is given in support of:
- Granting Protection
- Free trade
- Encouragement to export oriented small and tiny industries
- None of the above
- Terms of trade that relate to the Real Ratio of international exchange between commodities is called:
- Real cost terms of trade
- Commodity terms of trade
- Income terms of trade
- Utility terms of trade
- The main advantage in specialization results from:
- Economies of large-scale production
- The specializing country behaving as monopoly.
- Smaller Production runs resulting in lower unit costs.
- High wages paid to foreign workers.
- Net export equals ……
- Export * Import
- Export + Import
- Export – Import
- Exports of service only
- A tariff ………………….
- Increase the volume of trade
- Reduces the volume of trade
- Has no effect on volume of trade
- Both a. and c.
7. Terms of Trade of developing countries are generally unfavourable because …….
- They export primary goods
- They import value added goods
- They export few goods
- Both a. and b.
- Terms of Trade a country show ……………
- Ratio of goods exported and imported
- Ratio of import duties
- Ratio of prices of exports and imports
- Both a. and c.
- Terms of trade between two countries refer to a ratio of …..
- Export prices to import prices
- Currency values
- Export to import
- Balance of trade to Balance of payments
10. Rich countries have deficit in their balance of payments ……..
- Sometimes
- Never
- Alternate years
- Always
Q.2. Fill in the blanks.
- BOP means balance of Receipts and payments of …… (all banks/ State bank/ Foreign exchange by a country/ Government)
- Favourable trade means exports are ……. than imports. (More/ Less/ Neutral)
- Net barter terms of trade is also known as …. Terms of trade.(Commodity/ Income/Utility)
- ….. is not a factor affecting TOT. (Reciprocal demand/ Size of demand/ Price of demand)
- If tariff is higher, then the imports will …… (Increase/ Decrease/ Same as before)
- ……. has given the concept of reciprocal demand. (Mills/ Adam/ Ricardo)
- ……… is the curve, which expresses the total demand for one good (imports) in terms of the total supply of another good (exports). (Offer/ Official / Corporate)
- Balance of payment is prepared by an economy ……. (Yearly/ Monthly/ Weekly)
- …….. kinds of accounts are included in BOP. (2/ 3/4)
- …….is not a type of disequilibrium in BOP. (Cyclical/ Seasonal/ Frictional/ Disguised)
SET 3
Q.1. Multiple Choice Questions.
- The first classical theory of International Trade is given by …………………..
- Keynes
- Adam Smith
- Friedman
- Heckscher-Ohlin
- In classical theory of International Trade, the exchange of goods and services takes on the basis of ………….. system?
- Barter
- Money
- Labour
- capital
- If capital is available in large proportion and labour is less, then that economy is known as ……………..
- Capital Intensive
- Labour Intensive
- Both a. and b
- None of above
- In Heckscher Ohlin theory, what is assumed to be same across the countries?
- Transportation cost
- Technology
- Labour
- capital
- Opportunity cost is also known as ……………………
- Next Best alternative
- Transformation cost
- Both a. and b
- None of above.
- Factor proportions theory is also known as the
- comparative advantage theory
- laissez faire theorem.
- HeckscherOhlin theorem
- product cycle model.
- Trade between two countries can be useful if cost ratios of goods are:
- Equal
- Different
- Undetermined
- Decreasing
- According to Hecksher and Ohlin basic cause of international trade is:
- Difference in factor endowments
- Difference in markets
- Difference in political systems
- Difference in ideology
- The theory explaining trade between two countries is called:
- Comparative disadvantage theory
- Comparative cost theory
- Comparative trade theory
- None of the above
- David Ricardo presented the theory of international trade called:
- Theory of absolute advantage
- Theory of comparative advantage
- Theory of equal advantage.
- Theory of total advantage
Q.2. True or False.
- Absolute advantage theory is given by Adam Smith.
True
- Ricardo has supplemented Absolute advantage theory.
True
- Heckscher and Ohlin have given comparative cost advantage theory of International Trade.
False
- Multilateral trade means one country comes into trade with more than one country.
True
- Opportunity cost means unforgiving cost.
False
- Modern theory of International Trade is given by Ricardo.
False
- 2×2×2 model of International Trade is known by Heckscher Ohlin model.
True
- Transformation cost is also known as opportunity cost.
True
- Gravity model of trade was first used by Jan Tinbergen.
True
- Adam Smith advocated free trade and specialized.
True
Set 4
Multiple Choice Questions.
- GATT was made in the year ………………..
- 1945
- 1947
- 1950
- 1951
- The new world Trade organization WTO., which replaced the GATT came into effect from____
- 1ST January 1991
- 1st January 1995
- 1st April 1994
- 1st May 1995
- 5 banks of BRICS nations have agreed to establish credit lines in ….. currencies.
- Legal
- Plastic
- Crypto currency
- National
- Where was the 11th meeting of BRICS Trade Ministers held from 13 Nov 2019 – 14 Nov 2019?
- Shanghai
- Beijing
- Tokyo
- Brasilia
- What is the name of the SAARC satellite to be launched on May 5, 2017?
- South Asia Satellite
- South Asian Association Satellite
- South East Asia satellite
- SAARC satellite
- Full form of SAFTA is ……………………..
- South Asia Free Trade Agreement
- South Asia Foreign Trade Agreement
- South Asia Framework Trade Agreement
- Both a and b
6. Which of the following commitments has not been made by India to WTO?
- Reduction in tariffs
- Increase in quantitative restrictions
- Increase in qualitative restrictions
- Trade related Intellectual Property Rights
- The European Union was formally established on …..
- November, 1993
- April, 1995
- January, 1997
- May, 1996
8. SAARC was established in …..
- 1980
- 1985
- 1990
- 1995
- NAFTA came into effect in …..
- 1990
- 1994
- 1998
- 2004
10. The dominant member state of OPEC is ……………..
- Iran
- Iraq
- Kuwait
- Saudi Arabia
Q.2. Fill in the blanks.
- Headquarter of WTO is in ………….. Geneva/USA/Germany.
- Before WTO, ……………… was working instead of that. GATY/ GATR/ GATT.
- …………….. round negotiations initiated the establishment of WTO. Uruguay/ Urdun/ Urbuny .
- India had joined WTO in the year …………. (1995/ 1996/ 1997)
- In …………….. , SAARC was established. (1985/ 1986/ 1987)
- The first SAARC summit was organized at …….. (Dhaka/ Kathmandu/ Nepal)
- ……..is not a country in SAFTA. (India/ Nepal/ Pakistan/ USA)
- ……… countries are member of OECD. (34/ 35/ 36)
- ………… is not a country under OECD. (Norway/ Canada/ China)
- ………….. are the member states of European Union. (28/ 29/30)
thank you..Please provide questions for manufacturing management
Soon